Best 5kg 10kg 20kg compression Load Cell Sensors CPR705-15 Micro force sensor CPR Supplier
CPR in Room 101, Building A, Yinxin Science Park, No. 2, Jinquan 3rd Road, Liuyue Community, Henggang Street, Shenzhen, Guangdong, China Main products Best 5kg 10kg 20kg compression Load Cell Sensors CPR705-15 Micro force sensor CPR Supplier
This product has certain air permeability. It provides a tunnel for the skin to exchange air with the outside world. In the meantime, it contributes to the divergence of human heat. This product has certain air permeability. It provides a tunnel for the skin to exchange air with the outside world. In the meantime, it contributes to the divergence of human heat.
Shenzhen Cooperation Sensors & Instruments CO,LTD. is a national high-tech enterprise specializing in force measurement technology research and product development, production, sales and services, mainly engaged in the R&D and pro
Whole Process Application Service Brand Strangth Own many production lines of machining, sensor and instrument to lower pro-duction costs ut mostly. We always insist on offering the most suitable products, not cheap ones.
What are the characteristics of inductive pressure sensors? An inductive pressure sensor is an instrument that uses changes in the inductance of an induction coil to measure pressure. Commonly used structures of inductive pressure sensors are air gap type and differential type. The working principle of the air-gap type is that the diaphragm is displaced by the measured pressure acting on it. When the air gap between the diaphragm and the magnetic core increases on one side, the other side decreases, and the magnetic resistance of the inductor coil also fWhat is the composition of the feeder electrical control system? Control mode, inverter cabinet, electrical control cabinet and instrument cabinet, on-site operation guide, host computer and remote computer monitoring system.How does the material run on the belt? When the material runs on the tape, its weight is transmitted to the load cell by the tape, weighing roller, and weighing bridge. The load cell generates an electric signal proportional to the load weight of the weighing area and sends it to the weighing instrument. The weighing instrument calculates and processes the electrical signal of the load weight and the speed signal to obtain the instantaneous flow rate and the cumulative transportation volume of the belt weighing feeder, which are resp
CPR705-15 Double Ended Miniature Tension Load Cell Sensors
Load cell Sensors CPR manufacturers
weighing load cell
Professional High Quality CPR705-15 Force sensor (compression & tension) Force Sensor Load Cell
The design of CPR is of innovation. It is carried out by our designers who keep their eyes on current furniture market styles or forms.
force sensor (compression & tension) Load Cell withgoodprice-CPR
The use of the product helps manufacturers cut down labor costs, and shift the investment to other profit-generating things, such as brand advertising.
China pressure sensor CPR withgoodprice-CPR manufacturers-CPR
5kg 10kg 20kg compression Mini Load Cell CPR705-15 pressure sensor
Customized wheel spoke weighing sensor manufacturers FromChina
The reliable performance and long operational life of this product certainly make it a good value for money from the perspective of users in the long run.
Professional Wheel spoke weighing sensor load cell manufacturers
S-shaped tension and pressure sensor S
Introto Wheel spoke weighing sensor load cell CPR
This product will enhance the quality of life. It is convenient to use, and hence, can make life easier for people.
China Introto Wheel spoke weighing sensor load cell CPR manufacturers-CPR
The product has good permeability. To prevent bacterial build-up, air or water are allowed to pass through.
BestQuality High Quality CPR705-15 Crane Load Cell Load Cell manufacturers CPR Factory
This product has a long lifespan, enabling users to eliminate the hassles of climbing up a ladder or a pole to replace the old bulb. Thus, it helps users cut energy costs.
Features&Applications
Spoke sensor, the high quality alloy material.
High-temperature CPR705-15 Load Cell can be customized.
·Compression load cell
·Alloy steel/Stainless steel construction
·EMC/FCC/ROHS approved
·High accuracy
·High stability
·Easy to install
Suitable for force measurement in limited spaces. Widely used for industrial measurement and control, R&D and other applications.
·Protected against corrosion by nickel-plated treatment
·Metal foil strain gage technology.
·Suitable for small tension & compression testing machine, small coking coal and material level statistics, micro tension & compression force measuring equipments such as manipulator, film sticking machine, riveting machine, welding machine and plugging force meter
Double Ended Miniature Tension Load Cell CPR705-15
load cell CPR sensor Pressure Sensor
S-shaped tension and pressure sensor S
Tension testing machine sensor
Capacity:
5kg 10kg 20kg
Features & Applications
·Double ended miniature tension load cell
·Stainless steel construction
·High accuracy
·EMC/FCC/ROHS approved
·High stability
·Easy to install
·Protected against corrosion by nickel-plated treatment
·Suitable for testing machine, miniature tension and pressure test equipment, such us lamination machine, welding machine
Options
Type | Cap |
CPR705-15-5K | 0~5kg |
CPR705-15-10K | 0~10kg |
CPR705-15-20K | 0~20kg |
Specifications
Capacity | 0~20kg | Zero balance | 1%R.O |
Rated output | 2.0 ±10% mV/V | Creep | 0.1~0.05%R.O./30min |
Non-linearity | 0.05~0.1 % R.O. | Temp.effect on zero | 0.1%R.O./10℃ |
Hysteresis | 0.05~0.1% R.O. | Temp.effect on output | 0.1%R.O./10℃ |
Repeatability | 0.05~0.1 % R.O. | Input impedance | 350 ± 30Ω |
Temperature | - 20 ~ 80ºC | Out impedance | 350 ± 5Ω |
Compensated temp range | -10℃~60℃ | Insulation | ≥5000MΩ/50VDC |
Recommended excitation | 5~10V DC | Safe overload | 120% R.C. |
Maximum Excitation | 15VDC | Ultimate overload | 150% R.C. |
Cable | 4-core Shielded cable Ø3*3m | Protection class | IP54 |
Company Profile
National high-tech enterprise, R&D and manufacturing capabilities Shenzhen Cooperation Sensors Instruments Co., Ltd., was origined from2004, recognized as high-tech enterprise in the design and manufacture of sensor technologies. There are 80% professional technicians in our total staff so that strong technology support could be offered to our clients.
Our factory has modern sensor production line using global advanced manufacturing technology and management concepts to ensure our various types of sensors and detection instruments qualifies different market requirements. We look forward to establishing a long term and reliable trade cooperation on the principles of win-win.
Product categories and market services, agents of well-known foreign brands Our leading products include pressure sensors, miniature load cells, digital sensors, microcontroller multi-function miniature pressure display indicator, all-electric injection molding machine series sensors, intelligent GPRS module sensor signal transmission, intelligent fire-fighting instruments, software engineering support etc. Our company's marketing network covers all over 32 provinces of China after nearly 10 years of continuous development with the aim of providing customers with high-quality products and perfect after-sales service. We are also the agent of world well-known brands from Japanese and European, such as Japanese NMB load cell series, pressure sensors and meters, and American TRANSCELL, CELTRON's load cells and meters. Japanese NMB series sensors have been accepted widely in domestic market because of its reliable quality and economic price also as the first choice for national defense and high-precision control product. -Development history and important achievements In 2004, authorized by Japan NMB for long-term operating in China.
In 2006, launched into foreign markets successfully.
In 2007, became a special distributor of Freescale (formerly MOTOROLA) on pressure sensors.
In 2014, our expansion force test system gained a national patent.
In 2017, became a strategic partner with Harbin Institute of Technology.
In 2018, became a national high-tech enterprise and developed a variety of new energy sensors and software, launched a new product which can monitor expansion force and displacement at the same time.
In 2019, the expansion force test system successfully entered the field of new energy vehicles, and the newly developed products are installed distributed force and constant force test systems.
Best CPR163 250/500kg 1/2/5/10/50/100t Compression Load Cell force Sensor for truck platform scale Supplier
Best CPR702-S07 miniature Compression Tension column load cell Force Sensor for press machine Supplier
Best CPR1000C Differential pressure sensor for pressure flow level interface liquid gas Supplier
Best CPR503-88 thru hole Donut Washer type load cell for Force Measurement Gym Workout Equipment Company - CPR
Best Quality CPR503-88 Donut through hole Compression Tension load cell for Bolt Fastening Nut Runner Force Factory
multi signal output type Analog Amplifier Weight Transmitter for load cell sensor AMP-6 Supplier & manufacturers | CPR
Best AMP-6 High Frequency Tension weighing Transmitter load cell amplifier Supplier
Miniature Tension Compression screw thread Load Cell force sensor CPR601 Supplier & manufacturers | CPR
Best Micro tension compression Load Cell transducer for industrial Force measure Stamping equipment CPR705-41 Supplier