Best Micro tension compression Load Cell transducer for industrial Force measure Stamping equipment CPR705-41 Supplier

Double Ended Miniature Compression Tension Load Cell force sensor CPR705-41

Sensor housing (elastic element, sensitive beam) produces elastic deformation under the action of external force, so that the resistance strain gage (conversion element) pasted on its surface also deforms. After the resistance strain gage is deformed, its resistance value will change (increase). Larger or smaller), and then the resistance change is converted into an electrical signal (voltage or current) by the corresponding measuring circuit, thus completing the process of transforming the external force into an electrical signal.

Micro force sensor (Compression & Tension)

·Miniature load cell

·Stainless steel construction

·EMC/FCC/ROHS approved

·High accuracy

·High stability

·Easy to install

·Protected against corrosion by nickel-plated treatment

·Suitable for various small space measuring,  like measuring and control in the field of industry and technology development.

Capacities: 10/20/30/50/100/200/500/1000kg 1/2/5t

Purpose:

1. Force source range of monitoring equipment machine.

2. Limit force source range not to be excessively high or low.

Precautions for selection of load cell:

1. The normal operating force range should be more than 10% of the full scale of the sensor, and the best effect is within 80%.

2. The range of normal operating force, the maximum output of the equipment (output of servo motors, cylinders, etc.) overshooting force should be taken into consideration in advance when selecting the sensor.

3. The accuracy of the sensor: Absolute accuracy, relative accuracy, use required accuracy, repeat accuracy, dynamic accuracy and static accuracy, measurement accuracy, control accuracy, system accuracy.

4. Installation method: screw fixing, plane fixing, external dimension requirements: length, width, height, outer diameter, etc.

5. Force method: Point force, surface force, through hole force, tension measurement, pressure measurement, torque, etc.

FAQ

Advantages