News

Air Grille Manufacturer in SAUDI BIG5 2023

The largest construction event in Saudi Arabia will bring together over 28,000 attendees and over 750 local and international exhibitors from 40 countries to showcase the latest construction innovations and technologies. This is a must-attend show for Ventech. BIG20 is in Saudi Arabia to participate in the BIG5 exhibition in Dubai in 2022. We, Ventech, as a professional manufacturer of diffusers and grilles in China, have come to BIG5 again since November, to have face-to-face communication with customers from all over Asia, and visited our distinguished old customers who have always supported and trusted us. At BIG5, we also met a lot of potential and interested new clients related to the HVAC industry. At the same time, this is also a good opportunity for us to increase sales and expand market share in KSA and the Middle East market! We believe dark times are passing and the future is bright. Looking forward to seeing you again at the next Shanghai HVACR-2023 exhibition. 

Air Grille Manufacturer in SAUDI BIG5 2023

Yingde Ventech Air Conditioning Co.,Ltd2023-03-29 11:24:15

Reasons why factory-made air ducts are more advantageous than on-site production

Reasons why factory-made air ducts are more advantageous than on-site production 1. Comparison between traditional air duct and phenolic air ductThe traditional air supply ducts of central air conditioners are usually made of iron sheet or fiberglass as the inner layer, wrapped with thermal insulation materials, and wrapped with aluminum foil on the outside, which makes the air supply ducts heavy and large, labor-intensive and time-consuming for construction and installation, poor in appearance, low in air tightness, and low in performance. consumes a lot. Traditional air ducts can no longer meet the rapidly growing market demand and people's requirements for high-quality indoor environments.The phenolic color steel composite air duct is made of phenolic foam resin, curing agent, foaming agent and inorganic substances through chemical reaction to form a phenolic foam core material, one side is compounded with antibacterial coated aluminum foil, and the other side is compounded with color steel plates of various colors The air duct made by processing the composite sandwich panel. It has the characteristics of light weight, beautiful appearance, durability and simple construction, thus realizing the best combination of energy saving, environmental protection and beautiful appearance. It is an ideal substitute product for traditional air duct systems.Compared with traditional air ducts, phenolic composite air ducts have the following advantages:1) The phenolic composite air duct has good thermal insulation performance, which can greatly reduce the heat dissipation loss of the air conditioner;2) The phenolic composite air duct has a noise reduction effect. Compared with the metal air duct system, there is no need to set up noise reduction accessories such as noise reduction covers and noise reduction elbows;3) The installation period of the phenolic composite air duct is short, only about 1/5 of the traditional air duct;4) The phenolic composite air duct does not need to reserve construction space, so compared with the traditional air duct, the use of phenolic aluminum foil composite air duct can save 5-8cm of ceiling space;5) The phenolic composite air duct material is non-combustible, the flame retardant grade is Class A, smokeless and non-toxic, and meets the requirements of the national fire protection standard. The thermal conductivity is lower than 0.0220w/m.k, which can reduce the heat dissipation loss of the air conditioner;6) Light weight and high strength, especially the outer surface of the air duct is very hard, impact-resistant, and easy to install.2. Factory-made air ducts and on-site productionThe phenolic composite air duct can be installed and manufactured on site, or it can be manufactured in the factory and then transported to the construction site. Now more and more engineering companies prefer the latter, so what is the difference between the factory-made phenolic air duct and the on-site production of phenolic air duct? Time and labor costs, if these costs are saved in the factory, it only needs to be hoisted on site, and it also avoids the accumulation of waste disposal costs during the production process.In addition, there is almost no material loss in the production of air ducts in the factory, but in the case of on-site production by the engineering company without a cut-to-size board, the material loss is 15-20%, and the loss is even higher in the case of special-shaped parts! Calculated on 10,000 square meters of phenolic board, the loss is 1500-2000 square meters, and the loss cost is as high as 1/5. According to the calculation of 20 yuan/㎡, 10000*20=200,000 yuan, the loss is 30,000-40,000 yuan!This is not counting the cost of manual production and time. A skilled worker can make 40 square meters in 8 hours. Based on 10,000 square meters of phenolic boards, it takes 40 days for 10,000 square meters of phenolic boards to be produced by 6 people at the same time. It is better to buy the finished air duct directly in the factory than to buy the finished air duct directly in this way, which saves worry, time and effort.Factory-made cut-to-length boards with zero loss:It is easy for the engineer to make air ducts on-site to damage the protective film of the color steel plate and cause the iron sheet to rust. The gaps between the slices of the phenolic plate are not standardized by the workers, and it is easy to form a cold bridge, which will lead to heat loss, condensation, and moisture failure. Factory-made air ducts can avoid this situation, and the efficiency will be much higher!Duct flange:The air ducts are all controlled by machines from slicing, bending and forming, gluing, etc., and the air ducts are all pressed by standard production. The flange parts are made of PVC raw materials, which have good solid resistance and oxidation resistance. The quality of the flange is directly related to the overall firmness and service life of the pipe. The raw material PVC has strong toughness. Calculated according to the length of the 1.2-meter air duct, they can make up to 5 sections of air duct and 6 meters at the same time without deformation. , Greatly improve the work efficiency of hoisting air duct!According to the air duct production specification, rivets are required at the flange of the air outlet and the color steel plate, but sometimes in the on-site production, in order to meet the construction schedule, some masters use self-tapping screws to fix them, while their factories use rivets and rivets Much tighter than self-tapping screws.PS: Due to the standard production process and high production efficiency of the air duct in the factory, it saves a lot of purchasing and production costs, so it has been favored by many engineering companies in recent years! Although off-site production and installation may not be flexible enough, compared to the above-mentioned advantages of factory production, the disadvantages outweigh the advantages.

Reasons why factory-made air ducts are more advantageous than on-site production

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.2023-03-29 10:29:28

Central Air-conditioning Construction Site Experience-Part 3

Central Air-conditioning Construction Site Experience-Part 3 4. Condensate pipe installation(1) The diameter of the condensate pipe must meet the technical requirements. The installation must be completed before the internal wall plastering and waterproofing of the civil works.(2) When installing the condensate pipe, it is necessary to spring the wire (apply for inspection), then use a cutting machine to build a groove, and then pick it out. The depth of the buried wall is 15MM. The prefabricated panels can not be picked horizontally when they meet the picking groove along the board. If you want to make grooves on beams or shear walls, you must first report to the owner and supervisor for consent.(3) The installation of the condensate pipe must avoid the entrance door of the bathroom, and the distance from the door and window should be greater than 200MM.(4) The distance between the brackets for condensate pipe installation should be less than 800mm. Exposed parts must be insulated (except for tube wells). When installing the condensate pipe, the length of the hose should be between 20MM and 30MM (the distance between the nozzle and the nozzle).(5) After the condensing water pipe is installed, it must carry out the water flow and irrigation test, and report to the supervisor and the owner for inspection after passing the self-inspection. 5. Electrical Installation(1) The distance between the clamps of the wire pipe should be less than 600mm, horizontal and vertical, and the length of the corrugated pipe should not be greater than 500mm.(2) The wire box inlet pipe of the fan coil unit must be piped from above.(3) The wire joints must be soldered (in-line joints are prohibited), and double-wrapped with insulating tape and waterproof tape.(4) Electrical insulation must meet the requirements.(5) The gear speed line of the fan coil unit must be connected correctly and cannot be confused with the zero line. 6. Insulation(1) When the water pipe is insulated, the joint between the insulation pipe shell and the wooden ring must be glued and wrapped with tape.(2) When the air duct is insulated, the insulation glue should be evenly brushed without air holes, and the surface should be smooth and free of dirt. The splicing of the boards must be above the air duct, and the splicing must be glued.(3) The insulation material must not fall off, crack, or be damaged, and the insulation tape must be well bonded and not fall off.(4) When the water pipe is kept warm, the place where the pipe shell cannot pass is filled with foaming agent.(5) After the pipeline pressure test is completed, the pipeline well and the part where the water pipe passes through the wall should be protected first, so as not to affect the civil construction.(6) After the pipe insulation is completed, a film should be wrapped, try to wrap a single pipe, and the appearance inspection should meet the requirements. 7. Regulations for cooperation with civil engineering(1) Slots and holes on the wall and ground must be approved by the inspection.(2) The elastic thread is covered with pink thread, with stone red pigment, and the ink fountain is no longer used.(3) Do not scratch on the wall, such as drafting and making unnecessary marks.(4) If it is accidentally dirty and greasy, it should be removed with sandpaper in time; if other items are accidentally damaged, it should be repaired or compensated in time.(5) The holes to be drilled on the wall should be square and suitable in size. They must be struck with a chisel moderately, and direct beating with a hammer is strictly prohibited.(6) Without approval, drilling and slotting on shear walls and beams is strictly prohibited.(7) Pay attention to the protection of finished products of other units, do not stain walls and floors, do not damage waterproofing, doors and windows, wall corners, window corners and other objects.(8) The construction site must be clean and orderly, the materials stacked neatly, the construction waste should be cleaned up in time, no random throwing is allowed, and it is forbidden to dump garbage from upstairs to downstairs.(9) Strengthen the cooperation and coordination with civil engineering during construction, and do a good job in site handover. By Sammi

Central Air-conditioning Construction Site Experience-Part 3

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.2023-03-28 10:00:30

How To Solve The Large Difference In The Weight Of Pressed Tablets(2)

 Many customers will encounter the problem of large difference in the weight of pressed tablets during use. Here we will analyze the causes and solutions of the whole problem.7. The feeder is unbalanced or not installed in place, resulting in uneven filling.8. The dust scraper is uneven or not installed in place.Solution: leveling.9. The impeller speed of the forced feeder does not match the rotary table speed.Solution: match.10. The consistency between the punch and the middle die hole is not good, for example, there is a lot of powder leakage between the outer circumference of the down-punching and the wall of the die hole, resulting in the "astringent punching" phenomenon of the down-punching, resulting in insufficient material filling.Solution: The punch and middle die should be replaced.11. The length of undershoot is different, which is out of tolerance, resulting in uneven filling.Solution: error correction, error ± 5 μ Within m.12. For down-punching with damping, the damping force adjusted by the damping screw is inconsistent.Solution: readjust.13. The filling track is worn or the filling mechanism is unstable.Solution: replace or secure.14. Pursue the output, the rotating speed of the turntable is too fast, and the filling amount is insufficient.Solution: especially when pressing large pieces, the rotating speed should be appropriately reduced to ensure sufficient filling.15. The tablet press has excessive vibration, loose structure and unreasonable assembly.Solution: check the tablet press, set the pressure adjustment, and reduce the tablet force                                                                      Suzhou Pharma Machinery Co.,Ltd.2023/03/19Mia 

How To Solve The Large Difference In The Weight Of Pressed Tablets(2)

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 16:44:39

Take Employees To Visit The Photo Wall (1)

 Suzhou Pharma Machinery Co., Ltd. Located in Xiangcheng District, Suzhou City, Jiangsu Province The company covers an area of 10,000 square meters with 100+ employees Today the president of the company led the employees to visit the company photo wall Explain what Suzhou Pharma Machinery Co., Ltd. has done in recent years; Clean room engineering project laboratory engineering project pharmaceutical workshop engineering project pharmaceutical machinery supercritical extraction short path distillation etc. As the company grows, there are more and more engineering projects We will take pictures with customers for each project in the form of photos, In the future, explain to new employees the engineering situation of the year and some stories that happened in the middle. This is our company's photo wall, which records every moment of our common struggle and laughter. but you know what? There are more stories hidden behind these photos Every photo represents an integral part of our company's history. They record every bit of our growth, progress, unity, and struggle. Today I will lead you to visit this special place, and I hope you can find your own touch and inspiration from it. Today, we not only visited the company's historical and cultural photo wall, but more importantly, felt the teamwork and fighting spirit. I believe that in the future, we will continue to uphold this spirit, continue to innovate and surpass ourselves in the industry!                                                     Suzhou Pharma Machinery Co.,Ltd.2023/03/17Kevin

Take Employees To Visit The Photo Wall (1)

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 16:42:25

How To Make Sure The Clean Room Work Successfully

 Ensure the purification of materials entering the clean roomMaterials entering the clean room shall be cleaned and purified before being transported into the clean room, so as to reduce the amount of dust generated by materials in the clean room. Small items entering the clean room generally enter through the transfer window between the clean room and the outer corridor or between the clean rooms (adjacent rooms with different cleanliness levels).Ensure that the air entering the clean room is cleanDuring the operation of the purification air conditioning system, the air filters at all levels used must be intact without damage or leakage. In order to prevent the air supply system from bringing dust particles that should not enter the room into the room, it is necessary to regularly check the leakage of the primary, medium and end air filters used in the system.Ensure the air supply volume of the purification air conditioning systemTo ensure the air supply volume of the air conditioning system is to ensure the number of air changes in the clean room to meet the needs of indoor air distribution. During the normal operation of the purification air conditioning system, the air supply volume of the system should be measured regularly. The measuring points can be selected at the inlet (outlet) of the air supply fan and the air supply outlet. Because the air supply volume of the system is comprehensively considered in terms of energy consumption, indoor air distribution and other aspects. If the air supply volume of the system is too low, the air flow velocity at the air supply outlet in the clean room will be reduced, thus damaging the indoor air flow organization form, making the indoor polluted air unable to be discharged, and failing to meet the indoor cleanliness level required.Ensure the positive and static pressure in the clean room as required.During the operation of a clean room, it is generally required to maintain a certain positive and static pressure difference between the clean room and the adjacent room and corridor (including the outer corridor), that is, the static pressure value of the clean room is higher than that of the adjacent room (rooms with different cleanliness levels) and corridor, so as to avoid pollution caused by the air outside the clean room with high dust concentration such as the adjacent room and corridor. Therefore, during the operation of the clean room and purification air conditioning system, attention should be paid to the regular inspection, maintenance, adjustment and repair of the residual pressure valve in the system, as well as the pressure sensor, transmitter, regulator and actuator, so as to keep them in normal operation and maintain the required positive and static pressure in the room                   Suzhou Pharma Machinery Co.,Ltd.2023/03/15David

How To Make Sure The Clean Room Work Successfully

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 16:32:54

Biosafety Cabinet, Ultra-Clean Workbench, Fume Hood Are You Using It Right?

~Suzhou Pharma Small Class~ At present, the importance of laboratory biosafety has been paid more and more attention. Among them, the most important measures to ensure the biosafety of the laboratory are the use of biosafety cabinets, ultra-clean workbenches, fume hoods and other equipment. However, laboratory staff are not very clear about their performance, selection, operation and disadvantages, and sometimes may confuse biosafety cabinets, ultra-clean workbenches and fume hoods. In fact, there are essential differences among the three. 1. Different definitionsBiosafety cabinet (BSC): is a box-type air purification negative pressure safety device to prevent infectious experimental materials from polluting or infecting the laboratory or experimental operators in the process of experimental operation. It is used to protect staff, laboratory environment and experimental products, and is the most basic safety protection equipment in the biosafety protection barrier. It can be divided into 1-3 levels.Fume hood: is also called fume hood. It is used to discharge toxic and harmful gases (toxic smoke or corrosive chemical gases) during the experimental operation to the outside to protect laboratory personnel from toxic chemical gases, and also to prevent powder inhalation hazards.Ultra-clean worktable: It is designed to protect the experimental objects and materials operated in the worktable from pollution, and does not protect the staff and laboratory. 2. Different working principlesThe working principle of the biosafety cabinet is to pump the air in the cabinet outward to keep the negative pressure in the cabinet and protect the staff through the vertical air flow; The outside air enters the safety cabinet after being filtered by HEPA filter to avoid contamination of the treated sample; The air in the cabinet also needs to be filtered by HEPA filter before being discharged into the atmosphere to protect the environment. At the same time, the external exhaust flow is also purified to prevent environmental pollution.The working principle of the ultra-clean worktable is to blow the air outside the cabinet inward to keep the cabinet in a positive pressure state, and the air flow inside the cabinet is blown from top to bottom (also horizontal flow) to protect the experimental materials; The outside air enters the ultra-clean workbench after being filtered by the high-efficiency air filter, forming a continuous dust-free and sterile ultra-clean air laminar flow (more than 0.3 is removed μ M dust, fungi and bacterial spores). Ensure that the experimental object is not contaminated during operation.The working principle of the fume hood: it is mainly to pump the air in the cabinet outward (without HEPA filter) to maintain the negative pressure in the cabinet, so that some toxic smoke and chemical gases in the experiment can be discharged in time, thus protecting the laboratory personnel and the environment. 3. Different protection objectsThe biological safety cabinet protects the laboratory and experimental operators.The fume hood protects the laboratory and experimental operators, and does not protect the experimental objects.The protection object of the ultra-clean workbench is the experimental object, and the operator is not protected. 4. The pressure in the cabinet is differentBiosafety cabinet: negative pressure.Ultra-clean workbench: positive pressure.Ventilation cabinet: negative pressure. 5. The air flow direction in the cabinet is differentBiosafety cabinet: from the outside to the inside, from the bottom to the top.Ultra-clean workbench: blow from inside to outside and from top to bottom (also horizontal flow).Ventilation cabinet: from the outside to the inside, from the bottom to the top. 6. Different disadvantagesUltra-clean worktable: protect samples, not people and laboratories. Once microbial samples are placed in the working area, laminar air will blow the air with microbial media to the front desk staff and laboratories, causing danger.Fume hood: It can not effectively remove microbial media. Some microbial samples placed in the fume hood may spread outside the fume hood and pollute the laboratory environment.                                                                      Suzhou Pharma Machinery Co.,Ltd.2023/03/14Alice 

Biosafety Cabinet, Ultra-Clean Workbench, Fume Hood Are You Using It Right?

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 16:29:52

Why Use Isolation Technology

Sterile isolator is composed of sterilization experimental chamber, two chambers of transfer chamber and vaporized hydrogen peroxide sterilizer, The transfer cabin sterilizes the samples (with packaging containers), inspection tools, culture media and buffer solution (sterilizes surface microorganisms with vaporized hydrogen peroxide gas),Sterility inspection (or microbial limit inspection) shall be carried out after entering the experimental chamber through RTP sterile transmission. The isolator adopts a hard cabin (or soft and strong) body structure. The interior material of the cabin is 316 stainless steel or non-toxic PVC, and the exterior material of the cabin is stainless steel 304 or non-toxic PVC. The cabin cleanliness meets the requirements of GMP Class A. The control system can perform automatic control operation and operation detection.The transfer of internal materials is carried out through the gloves provided by the isolator (gloves need to be regularly tested for leakage, pressure attenuation method). After sterilization, internal purification shall be carried out through the high efficiency filter H14 at the inlet and outlet, so as to maintain the Class A laminar flow (or turbulent flow) inside the cabin. The bacteria collecting instrument is integrated in the experimental cabin for drug sterility inspection and microbial limit inspection. After the inspection, the isolator is sent out through the outer door. Why use isolation technology Compared with the final sterilization products, there are more variables in the sterile operation process of non-final sterilization products.Every error in the operation process may cause product pollution.Some manual or mechanical operations have a great risk of contamination during aseptic operation.The need to protect products and operators. Operating steps of Sterile isolatorStep 1: Entry of test articles and inspection toolsStep 2: Preparation before sterilizationStep 3: dehumidification - regulation - sterilization - ventilation and residue removalStep 4: Experimental operation  Suzhou Pharma Machinery Co.,Ltd.2023/03/13Spencer 

Why Use Isolation Technology

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 16:18:31

How To Solve The Large Difference In The Weight Of Pressed Tablets(1)

Many customers will encounter the problem of large difference in the weight of pressed tablets during use. Here we will analyze the causes and solutions of the whole problem.1. The particle size distribution is uneven, and the particle flow rate is different during tablet pressing, resulting in uneven particle size filling into the middle mold hole. If the amount of coarse particles is large, the piece is light, and if the amount of fine particles is large, the piece is heavy.Solution: The particles should be mixed evenly, or the whole particles should be re-grained to ensure uniform particle size.2. If there is fine powder adhering to the punch, the difference in sheet weight may be large.Solution: At this time, the down-punch rotation is not flexible, so it is necessary to check in time, remove the die, and clean the down-punch and middle die holes.3. The particle flow is not good, and the amount of particles flowing into the middle mold hole is more or less, resulting in excessive difference in sheet weight and exceeding the limit.Solution: It is necessary to re-granulate or add appropriate flow aids, such as micro-powder silica gel, to improve particle fluidity.4. Particle layering.Solution: Solve particle layering and reduce particle size difference.5. For smaller tablets, choose materials with larger particles.Solution: select particles of appropriate size.6. The feeding hopper is blocked, which often occurs in drugs with strong viscosity or moisture absorption.Solution: dredge the feeding hopper, keep the tablet pressing environment dry, and add flow aids appropriately.                                                        Suzhou Pharma Machinery Co.,Ltd.2023/03/12Mia 

How To Solve The Large Difference In The Weight Of Pressed Tablets(1)

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 16:16:02

Clean Room

 Also known as Clean workshop. The main function of clean room is indoor pollution control, without clean room, pollution-sensitive parts can not be mass produced. In the FED-STD-2, a clean room is defined as a room with air filtration, distribution, optimization, construction materials, and equipment, with a specific set of operating procedures to control the concentration of airborne particles, to achieve an appropriate level of particle cleanliness. The degree of cleanliness and the continuous stability of pollution control are the core standards for testing the quality of clean rooms, which are divided into several grades according to factors such as the regional environment, the degree of cleanliness and so on.                                                    Clean room in the construction of purification projects, the need to use the following equipment:  A. Decoration structure : 1: the purification equipment needed for the clean room mainly includes: air shower room , laminar flow hood, transfer window, high-efficiency air supply (divided into ordinary high-efficiency air supply, integrated high-efficiency air supply, filter can be replaced high-efficiency air supply),pressure relief valve, air volume control valve, etc. , after the clean room is done, some local purification level requirements are particularly high, so we recommend the use of clean workbench, clean shed and other purification equipment.  2: color steel plate for enclosure structure all kinds of aluminum profiles, channel aluminum , angle aluminum, shape column aluminum, outer disc, three-dimensional joint, door plug, inner arc, door material, window material, etc.) auxiliary materials angle iron, round steel, rubber plug, white nails... B . Air conditioning and ventilation: 1. The main materials of the air-conditioning ventilation part are air-conditioning main engine, return air duct, galvanized water pipe (or PVC pipe) water tower, gate valve water pump Y-type filter, rubber hose, check valve, water flow switch, thermometer, pressure gauge, water filter, various pipe code 2: the main materials of the ventilation part are medium-efficiency supercharger box, air valve, air volume control valve, primary rain-proof louver, air-return louver, primary filter, medium-efficiency filter, high-efficiency filter, laminar flow hood (FFU) insulation cotton, moisturizing hose, various accessories  C. Electrical parts: 1, Air Conditioning Circuit 2, purification equipment circuit 3, Lighting Circuit  D. Floor: 1. Epoxy floor 2. PVC floor 3. Elevated floor                                                    If you want to know more about clean room, please pay attention to us, website:www.sz-pharma.com Suzhou Pharma Machinery Co.,Ltd.2023/03/11Lucy

Clean Room

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 16:13:33

How to Ship a Container

 Hi, today's video explains how our Suzhou  Pharmal Machinery Co., Ltd. transports goods safely and securely to all parts of the world. Follow the camera to experience a shipment journey~Regarding the problem of shipping container goods, many customers are worried about how to transport the purchased goods to their countries and reach their hands. Please take a look at our Suzhou Pharma Machinery Co., Ltd. for clean room engineering projects, pharmaceutical machinery and equipment, air purification How the equipment is packaged and shipped,You can see from the video that we have fully protected the packaging of the products, such as air showers,pass box, clean workbenches, and peripheral products in the clean room, all of which are packaged in fumigation-free wooden boxes or pallets, and then used The product is wrapped with bubble film to avoid the goods being in the container during transportation. During the shipment process, when the container is full, we will use high-quality tighteners to fix the goods to ensure the damage caused by the shaking of the goods and ensure the complete delivery of the goods. To all over the world, in the hands of every customer.Suzhou Pharma Machinery Co., Ltd. has accumulated 500+ clean room engineering projects worldwide, and ships 100+ containers of goods to all over the world every year. We have rich shipping experience. I believe that in the future, we will also choose Suzhou   Pharma Machinery Co., Ltd., look forward to your joining~                                    Suzhou Pharma Machinery Co.,Ltd.2023/03/10Kevin

How to Ship a Container

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 16:02:19

Purification System Operation Management System

 In order to ensure the safe, efficient and energy-saving operation of the purification system, it is very necessary to formulate a strict and effective operation management system in the daily management process and strictly implement it. The rules and regulations such as the personnel who are not allowed to enter the clean room, the daily precautions, the registration system for the status of the personnel who are allowed to enter the clean room, the articles that are not allowed to enter the clean room, the personnel access instructions, the selection and management system of appliances and equipment, the health and safety system, the management system of the clothing used in the clean room, the education and training system and the health measures shall be specified.1. Personnel not allowed to enter the clean room:Persons with the following conditions shall not enter the clean room:People with sunburn, peeling, trauma, inflammation and pruritus; Personnel who have abnormal reactions to chemical fibers and solvents; Severe hand sweating; Excessive nasal discharge; People who catch cold, cough and sneeze; Excessive loss of scalp and hair.2. Daily precautions:Try to take a shower, change clothes, wash your hair regularly and keep your body clean every day; Men try to shave every day; Do not drag your feet to walk in the clean room, do not shake your arms, turn, and do not move or walk unnecessarily; Smoking and eating are not allowed in the clean room.3. Registration of the status of persons entering the room:The number of people entering the clean room shall be limited to the minimum: the density of personnel in the clean room of level 5 and higher shall not be greater than 0.1, and the density of personnel in the clean room of lower than level 5 shall not be greater than 0.25; The number and time of people entering the clean room in the morning and afternoon should be registered separately; The rescuers and time of entering the clean room shall be registered.4. Items not allowed to be brought into the clean roomIn addition to all items that can be brought into the duty room regularly as required, paper (including paper and note paper) and pen (pencil, pen, rubber, etc.); All personal belongings include keys, watches, handkerchiefs, notebooks, etc.                                                     Suzhou Pharma Machinery Co.,Ltd.2023/03/08David 

Purification System Operation Management System

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 15:56:52

How Should Different Laboratories Correctly Select Biosafety Cabinets?

~Suzhou Pharma Small Class~ 1. When the biosafety level of the laboratory is Grade I or Grade II, the operation may produce microbial aerosol or spill, the Grade I biosafety cabinet can be used;2. When the biosafety level of the laboratory is Class II and infectious materials are handled, the Class II biosafety cabinet with partial or full ventilation shall be used; If the laboratory involves the treatment of chemical carcinogens, radioactive substances and volatile solvents, it can only use Class II-B full exhaust (B2) biosafety cabinet.3. When the biosafety level of the laboratory is Grade III, Grade II or Grade III biosafety cabinet shall be used; For all operations involving infectious materials, the fully ventilated Class II-B (B2) or Class III biosafety cabinet shall be used.4. When the biosafety level of the laboratory is Grade IV, the Grade III full-exhaust biosafety cabinet shall be used. When personnel wear positive pressure protective clothing, they can use Class II-B biosafety cabinet.The secondary biosafety cabinet can be divided into four levels according to the inlet air velocity, exhaust mode and circulation mode: A1, A2, B1 and B2. The specific differences are as follows:The minimum or average measured air velocity of the front window of A1 type safety cabinet shall be at least 0.38m/s. There is no internal circulation air flow, and 100% of the gas is filtered out through the exhaust port.The minimum or average measured air velocity of the front window of A2 type safety cabinet shall be at least 0.5m/s. 70% of the gas is recycled to the working area through HEPA filter, and 30% of the gas is filtered and discharged through the exhaust port.The minimum or average measured air velocity of the front window of the B1 type safety cabinet shall be at least 0.5m/s. 70% of the gas is discharged through the HEPA filter at the exhaust port, and 30% of the gas is recycled to the working area through the HEPA filter at the air supply port.The minimum or average measured air velocity of the front window of the B2 type safety cabinet shall be at least 0.5m/s. It is a 100% full-discharge safety cabinet without internal circulating air flow, which can provide biological and chemical safety control at the same time, and can operate microbial experiments with volatile chemicals and volatile nuclear radiation as additives.  In addition: 1. HEPA filter can not effectively filter and remove chemical gases. If chemical gases are released in biological test, biological safety cabinet equipped with external discharge pipe must be used. 2. If cytotoxic is involved in the test, the cytotoxic biosafety cabinet must be used. summaryThe biosafety cabinet is a negative pressure purification workbench. The correct selection and use of the biosafety cabinet can really protect the staff and laboratory environment; The ultra-clean worktable is only a clean worktable that protects the operating objects and does not protect the staff and laboratory environment; The fume hood may pollute the laboratory environment when the operating samples contain microorganisms in order to discharge the harmful gases during the experimental operation to the outside.  The fume hood and ultra-clean worktable are not biosafety cabinets and cannot be used in the experiment or production process involving microbial materials. In the scientific research, teaching, clinical inspection and production of microbiology and biomedicine, we should learn to correctly select and use biosafety cabinets, ultra-clean workbenches and fume hoods.                                                                      Suzhou Pharma Machinery Co.,Ltd.2023/03/07Alice

How Should Different Laboratories Correctly Select Biosafety Cabinets?

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 15:54:42

Clean Room Standards

 Clean room test criteriaTo prove that the clean room works satisfactorily, it must be proved that it meets the requirements of the following criteria:1. The air supply volume of the clean room is sufficient to dilute or eliminate indoor pollution.2. The air in the clean room flows from the clean area to the area with low cleanliness,the flow of polluted air reaches the minimum, and the flow direction of air at the entrance and in the indoor building is correct.3. The air supply in the clean room will not significantly increase indoor pollution.4. The movement state of indoor air can ensure that there is no high concentration gathering area in the secret room.If the clean room meets the requirements of these criteria, its particle concentration or microbial concentration (if necessary) can be measured to determine that it meets the specified clean room standards.  Clean room test:1. Supply air volume and exhaust air volume: if it is a turbulent clean room, it is necessary to measure its supply air volume and exhaust air volume. If it is a one-way flow clean room, its wind speed shall be measured.2. Air flow control between zones: in order to prove that the air flow direction between zones is correct, that is, from the clean zone to the area with poor cleanliness, it is necessary to detect: (1) the pressure difference between zones is correct; (2) The air flow direction at the door or at the opening of the wall and floor is correct, that is, from the clean area to the area with poor cleanliness.3. Filter leakage detection: the high-efficiency filter and its outer frame shall be inspected to ensure that the suspended pollutants will not pass through: (1) the damaged filter; (2) The gap between the filter and its outer frame; (3) Other parts of the filter device.4. Isolation and leak detection: This test is to prove that suspended pollutants do not penetrate the building materials into the clean room.5. Indoor air flow control: The type of air flow control test depends on the air flow mode of the clean room - turbulent flow or one-way flow. If the air flow in the clean room is turbulent, it must be verified that there is no area with insufficient air flow in the room. If it is a one-way flow clean room, it must be verified that the wind speed and direction of the whole room meet the design requirements.6. Suspended particle concentration and microbial concentration: if the above tests meet the requirements, the particle concentration and microbial concentration (if necessary) shall be measured finally to verify that they meet the technical conditions of the cleaning room design.7. Other tests: In addition to the above pollution control tests, sometimes one or more of the following tests must be carried out: Temperature,Relative humidity,Indoor heating and cooling capacity, Noise value, Light intensity, Vibration value                                    Suzhou Pharma Machinery Co.,Ltd.2023/03/06Spencer 

Clean Room Standards

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 14:56:04

What Goes Into Constructing a Clean Room?

 What goes into constructing a clean room?Constructing a clean room is a complex process that requires professional design and construction personnel. The proportion of various parameters in the clean room must be calculated and optimized to ensure it meets the required standards. The parameters include airflow direction, temperature, indoor layout, and auxiliary equipment installation. To make sure the clean room can meet all requirements, some room for transformation must be designed into the project, so it can be adjusted to fit new production processes without wasting time and money on unnecessary transformations in the future. The cost of constructing a clean room depends on the size of the space and the complexity of the design and materials needed. Proper planning is essential in order to minimize any unexpected costs that could arise from improper planning. Additionally, careful consideration must be given to the selection of qualified personnel with the appropriate experience and qualifications for the task.How much does it cost to construct a clean room?The cost of constructing a clean room depends on several factors, including the size of the room, the materials used, the complexity of the system, and the local labor and installation costs. Generally speaking, clean rooms can range from $50,000 to more than $1 million depending on the specifications and size. The most expensive part of constructing a clean room is often the labor required to install the systems and walls.The cost of constructing a clean room also depends on the level of cleanliness required. A standard clean room will require less equipment and thus cost less, while higher levels of cleanliness such as an ISO Class 7 or 8 require additional components and thus cost more. Additionally, the geographic location of the clean room can also affect the cost, as certain areas may require specialized materials and labor that could increase the total cost. Ultimately, a clean room construction project should be carefully planned and budgeted for in order to ensure that the desired level of cleanliness is achieved without overspending. By working closely with experts in the industry, you can develop a plan to construct a clean room that fits your needs and budget.                                    Suzhou Pharma Machinery Co.,Ltd.2023/03/05Mia 

What Goes Into Constructing a Clean Room?

SUZHOU PHARMA MACHINERY CO.,LTD.2023-03-27 14:53:09

The characteristics, design methods and comparison of commonly used air-conditioning systems Part Three

The characteristics, design methods and comparison of commonly used air-conditioning systems Part Three  2) Fresh air volume The fresh air volume of the air conditioning system shall not be less than 10% of the total air supply volume, and shall not be less than the larger value of the following two air volumes: Make up for exhaust and maintain the fresh air volume required for indoor positive pressure; Guarantee the fresh air volume required by each person in each room every hour.2. Forms and selection of commonly used airflow organization The airflow organization in the air-conditioning area should meet the requirements of the design temperature and humidity in the air-conditioning area and its accuracy, the allowable airflow velocity in the work area, noise standards, air quality, indoor temperature gradient and air distribution characteristic index (ADPI) according to the purpose of the building. Requirements: uniform airflow distribution, avoiding short circuits and dead ends; design and calculation based on building characteristics, interior decoration, technology (including equipment heat dissipation factors) or furniture layout. The airflow velocity in the personnel activity area of the air-conditioned room should not be too large, and the relationship between the allowable velocity of the indoor activity area and the indoor air temperature should be considered. The main air supply form of the air-conditioned room: louver tuyere or slit-shaped tuyere side delivery; diffuser, orifice or slit-shaped tuyere top delivery; floor diffuser down-supply; nozzle air supply.Pre insulated duct board cutting machine is also called a cnc pre insulated duct cutting machine. Pre insulated duct board cutting machine can be used to cut PIR and PU duct panels. Pre insulated duct board cutting machine is a highly efficient cnc machine. Pre insulated duct board cutting machine can be used to make any pre-insulated ducts. Venetian air port or slit type air port side delivery: According to the characteristics of the air-conditioned room, the air supply and return ports can be arranged as one-sided up-supply and up-return, single-side up-send and down-return, double-side up-send and up-return, and both-sides up and down-return , single-side upsend, corridor return air and other forms.、1) For the air-conditioning system that only serves for cooling in summer, and the floor height of the air-conditioning room is low, the upward-sending and upward-returning method can be used; 2) The air-conditioning system mainly supplies hot air in winter, and when the floor height of the air-conditioning room is low, it is advisable to adopt the upper-supply and lower-return method; 3) The air-conditioning system used throughout the year should generally determine which method to use based on the calculation of the airflow organization; 4) Air-conditioned rooms with low storey height and large depth should adopt single-side or double-side air supply and attached jets. Diffuser, orifice plate or slit-shaped air outlet top delivery: when the floor height is low, there is a suspended ceiling or a technical interlayer is available, round, square and slit-shaped diffusers can be used for top delivery; when the requirements are high, you can use Adopt air supply orifice plate and slit-shaped tuyere, etc. combined with architectural decoration to evenly top-supply. Floor diffuser delivery: for air-conditioned rooms with high floor height and large depth, the floor diffuser can be used for delivery. Nozzle air supply: air-conditioning places with tall spaces, such as auditoriums, gymnasiums, theaters, etc., can use the side or top delivery of the nozzle. Pre insulated duct board cutting machine is also called a cnc pre insulated duct cutting machine. Pre insulated duct board cutting machine can be used to cut PIR and PU duct panels. Pre insulated duct board cutting machine is a highly efficient cnc machine. Pre insulated duct board cutting machine can be used to make any pre-insulated ducts. by Debbie

The characteristics, design methods and comparison of commonly used air-conditioning systems Part Three

YINGDE VENTECH INTELLIGENT EQUIPMENT CO., LTD.2023-03-27 10:40:50

Sustainable and Durable: Light Gauge Steel Buildings for Warehouses and Workshops

Sustainable and Durable: Light Gauge Steel Buildings for Warehouses and WorkshopsLight gauge steel buildings have become increasingly popular in recent years, especially for warehouses and workshops. These structures are made of cold-formed steel sections, which are lightweight, easy to install, and highly durable. They offer several advantages over traditional construction methods, such as concrete and wood, making them an excellent choice for contractors and developers.One of the primary benefits of light gauge steel buildings is their sustainability. Steel is a highly recyclable material, and the use of light gauge steel in construction reduces waste and minimizes the impact on the environment. Additionally, steel structures are energy-efficient and can be designed to meet energy codes and standards. This can result in lower energy costs and a smaller carbon footprint over the life of the building.Another advantage of light gauge steel buildings is their durability. Steel is a strong and resilient material that can withstand harsh weather conditions, seismic activity, and even fire. This makes it an ideal choice for warehouses and workshops, which often require heavy equipment, storage, and industrial processes. Steel structures can also be designed to resist corrosion and rust, which can prolong their lifespan and reduce maintenance costs.Construction with light gauge steel is also faster and more efficient than traditional methods. Steel sections are prefabricated off-site, which reduces on-site labor and construction time. This can result in lower construction costs and faster project completion. Additionally, modular building techniques can be used to create custom designs and configurations that meet specific project requirements.Overall, light gauge steel buildings offer a sustainable, durable, and efficient solution for warehouse and workshop construction. Contractors and developers can benefit from lower construction costs, faster project completion, and a reduced environmental impact. With their many advantages, it's no wonder that light gauge steel buildings are becoming the preferred choice for industrial construction projects.About LidaLida Group was established in 1993, as a professional manufacturer and exporter which is concerned with the design, production, installation, and marketing of engineering construction.Lida Group has achieved ISO9001, ISO14001, ISO45001, EU CE certification (EN1090) and passed SGS, TUV, and BV inspection. Lida Group has obtained Second Class Qualification of Steel Structure Professional Construction Contracting and General Contracting Qualification of Construction Engineering.   Lida Group is one of the most powerful integrated building engineering companies in China. Lida Group has become a member of several associations such as the China Steel Structure Association, China Council for the Promotion of International Trade and China Building Metal Structure Association, etc. The main products of Lida Group contain a large-scale labor camp, Steel structure buildings, LGS Villa, Container house, Prefab house, and other integrated buildings. Till now, our products have been exported to more than 145 countries and regions.

Sustainable and Durable: Light Gauge Steel Buildings for Warehouses and Workshops

Lida Group2023-03-27 10:37:35

More