multi signal output type Analog Amplifier Weight Transmitter for load cell sensor AMP-6 Supplier & manufacturers | CPR

Weighing Indicator

Multi signal output type Analog Amplifier Weight Transmitter for load cell sensor AMP-6 Supplier & manufacturers | CPR

Offer wholesale price, high quality weighing indicator, available Aluminum alloy housing weighing indicator, stainless steel weighing indicator for various load cell applications and easy to use them.

The sensor signal amplifier precisely amplifies the output signal of the sensor, and carries out voltage stabilization, constant current supply bridge, voltage-current conversion, impedance adaptation, linear compensation, temperature compensation, etc. inside the circuit, and converts the mechanical quantity into standard current and voltage signal output: After 4 ～ 20mA, 0 ～ 10mA, 0 ～ 5V, 0 ～ 10V, directly interface with automatic control equipment or network with computer.

The amplification of the amplifier is achieved by controlling the energy with the input signal, and the power consumption required for amplification is provided by the energy. For linear amplifiers, the output is the reproduction and enhancement of the input signal. For non-linear amplifiers, the output is a function of the input signal. Amplifiers are divided into mechanical amplifiers, hydraulic amplifiers and pneumatic amplifiers according to the physical quantities of the processed signals. Among them, the most widely used are electronic amplifiers. With the promotion of jet technology (see jet components), the application of hydraulic or pneumatic amplifiers has gradually increased. Electronic amplifiers are divided into vacuum tube amplifiers, transistor amplifiers, solid-state amplifiers and magnetic amplifiers according to the active devices used. Among them, transistor amplifiers are the most widely used. Transistor amplifiers are often used for voltage and current amplification of signals in automated instruments. The main forms are single-ended amplification and push-pull amplification.

Technical Parameters:

1. Power supply voltage: 18~30VDC or 15~24VAC

2. Input sensitivity: 0.8~6 mv/v

3. Sensor excitation voltage: ±12VDC

4. Comprehensive accuracy: ≤±0.05%FS

5. Rated output: 0~5v, 0~10v, 0~±5v, 0~±10v, 0~20mA 0~10mA, 4~20mA (all the above signals can be switched without returning to the factory)

6. Sampling frequency: ≥1khz

7. Working temperature: -30℃~85℃

8. Protection level: IP64

Function parameter:

1. Wide input range, 0.8~6mV/V can Connect with most strain bridge sensors

2. With strong load capacity, 4 350Ω sensors can be connected

3. The original imported electronic components are used, with high response frequency and good long-term stability. The comprehensive accuracy reaches ±0.05% FS

4. Input power reverse connection protection and output short circuit protection

5. Power supply 18~30VDC (24VDC recommended) or 15~24VAC

6. Aluminum shell

7. Suitable for various strain bridge sensors such as pressure, tension, torque, etc.

FAQ

Advantages