Activated Carbon Granulation

According to the external shape, it is usually divided into powdered activated carbon, irregular granular activated carbon and columnar granular activated carbon. Most of the powdered activated carbons are wood activated carbons, which have failed to meet the usage standards of some industries due to the problems that the filter surface is easy to block and the powder is difficult to separate. Irregular granular activated carbon has a certain shape, high mechanical strength, less dust pollution, and has advantages in the process of preparation, storage and use. The columnar granular activated carbon particles can make up for the problems of powder activated carbon particles, which are easy to block and difficult to separate powder due to the existence of the filter surface. It also has the advantages of high mechanical strength and less dust pollution. It is easy to meet the special requirements of different industries.

Columnar activated carbon product introduction

Appearance:

gray-black, cylindrical, odorless.

Features:

Wooden columnar activated carbon is made of high-quality sawdust, coconut shell, etc. as raw materials, and is made by crushing, mixing, extrusion, molding, drying, carbonization and activation.

Advancement:

Due to the use of high-quality sawdust and coconut shells as raw materials, the columnar activated carbon produced has lower ash content, less impurities and gas-phase adsorption value than traditional coal-based columnar carbon. The pore size distribution of the product is reasonable, and it can achieve huge adsorption and desorption, thereby greatly improving the service life of the product (average 2-3 years), which is 1.4 times that of ordinary coal-based carbon.

Originality:

The wooden columnar activated carbon adopts the proprietary technology of non-bonded shaped activated carbon. Change the traditional method of forming with traditional binders such as coal tar and starch. It does not contain binder components, and it depends entirely on the affinity between carbon molecules and the special properties of the raw materials themselves. Made with scientific formula, it can effectively avoid clogging of carbon pores and give full play to the adsorption function of rich and developed carbon pores.

Applicability:

①, gas phase adsorption ②, organic solvent recovery (benzene gas toluene, xylene, acetone recovery in the acetate fiber industry) ③, impurities and harmful gas removal, waste gas recovery ④, oil refinery, gas station, oil depot excess gasoline recycling.

Product advantages:

1： The service life is 4-5 times that of ordinary coal-based activated carbon.
2： High adsorption and desorption, thus greatly improving the recovery rate of the solvent.
3.：High strength and low ash content, reasonable pore size distribution.
4：Cost-effective, suitable for organic gas recycling in this place.
5： High ignition point, safe to use.

The production process of activated carbon granules

Pelleting - conveying - cooling - storage - packaging

The pulverized coal enters the buffer silo through the screw conveyor, and then enters the mixing mixer after being measured by the volumetric closed quantitative feeder.

Coal powder, coal tar and water are mixed uniformly in the mixer according to a certain proportion, and then enter the activated carbon granulator for granulation and molding.

The formed columnar activated carbon granules are sent to the dryer through the belt conveyor, and sent to the cooler through the skirt belt conveyor. After cooling, they can be sent to the buffer silo for packaging.