Luxury Intelligent flap gate ---can be compatible with IC card , ID,RFID card ,barcode , fingerprint reading card recognition device used for staff, provide civilized , orderly access methods; effectively manage the access of staff . Can be widely used in the station, wharf subway , factories, office building , hotel , clubs, intelligent community , enterprises and institution that need intelligent access management.

1. Product Instruction

MBC2405C channel gate controller, equipped with brushless servo motor, servo control technology, real-time detection of motor position, no external encoder, self-learning load curve, with physical anti-clip protection, sensitivity adjustable characteristics；Support access mode Settings such as card swiping, free and prohibited；It has the logic detection of illegal entry, following passage, retention, reverse passage, infrared anti-clamp and so on. It is suitable for various kinds of channel gates, swing gates, wing gates, translation gates, three roller gate and so on.

1.1. Functional characteristics

1.2. Technical parameters

² Input power：DC24V，recommend a unilateral 150W / 6.5A；

² Adaptation motor：Brushless DC motor below 60W with 2400 line position feedback;；                                                                       

² Communication mode: RS232 serial port communication, Modbus protocol is supported；

² Spare battery: DC12V (for switching off power)；

² Working environment: -20℃ ~ 55℃, humidity below 90% (no condensation)；

² Infrared sensor: 6 independent interfaces, PNP or NPN normally open, collector open type；

² Audio output: external 8w 4 Ω horn。

1.3. Normal open and fire protection functions

l Normally open mode：Long press the card button 3 seconds or the GND level 3 seconds of the swiping signal port, and the switch will enter the normal opening mode. At this time, the access door opens (infrared judgment fails), the light shows green light, and the buzzer and horn have no output. Cancel the signal, switch off the door, and restore the previous state.

Fire protection mode：Auxiliary port F is connected to GND, and the gate enters the fire-fighting mode. At this time, the door opens (infrared judgment fails), the light shows green light, the buzzer rings, and the voice announces "fire alarm, please evacuate quickly". Cancel the GND level, switch the gate and restore the previous 

Features&Function: 

1. It owns fault self-check and alarming prompt function to facilitate user's maintenance and use.

2. The operational status of the device can be programmed at the main control panel.

3. The barrier gate also owns mechanical structure and sensing an-pinch double protection function.

4. Acoustic and light alarming function: The gate provides illegal intrusion and tailing alarming.

5. Anti-collision function: the telescopic arm will automatically lockdown when no gate opening signal received.

6. The gate barriers can be adjusted synchronously.

7. The gate owns automatic resetting function, the system will automatically cancel the user's access permission when there is no one pass the gate within the ruled time, and the system will cancel passing rights of the user automatically and the standard waiting time is 10s.

8. The channel will automatically open after power-off and will close automatically after power-on.

9. It can be linked with a variety of reading devices to working by receiving relay switch signal.

10. Single direction or two-way direction control of personnel in and out is available.

11. It can realize remote control and management directly by computer.

12. The machine cabinet of the flap barrier gate can be lengthened according to customer demands and the telescopic boom material is selective available.

Customize Extended Functions:

1. Counting and alarm functions;

2. Case material is 304 stainless steel, other materials can also be customized

3. Remote control switch

4. Dynamic integrated face recognition

5. Emergency escape function can be added to open the gate by remote button in case of special emergency

6. Box thickness standard 1.5mm

7. Fingerprint recognition of time attendance

8. QR code

After-sales services:

1.All our new products sold enjoy 36 months warranty and more spare parts are provided.

2.After-sales service staff are online for 18 hours/day and all emails are replied within 1 hour. We offer life-time technology support on line, by emails, videos, phone calls, etc. We have engineers speaking English, Spanish and Arabic, etc. They are convenient to communicate with buyers or users directly.

3.Engineers' on-site services are provided. Engineers are dispatched to customers' countries to handle various thorny problems.