Micro prism diffuser for LED lighting UGR<16&19 Prismatic sheet
Excellent selection of 100% virgin material
On equal conditions, the light transmittance is obvious higher than traditional matte or orange peel texture diffusion sheet, at the same time effectively suppress the glare value.
Scientific designed structure
pyramid diffuser sheet with aligned arrays of Inverted Pyramid, takes on homogeneous look due to scientific structure;the LED light through the bevel surface of pyramid,then the light angle will be changed, lead to decrease the value of glaring.
Anti Glaring Diffuser Sheet for UGR< 19 (JK-LZB)
Unified Glaring Rating<19
Pattern : Concave hexagon, cone bottom
Material : PMMA
Thickness : 1.2mm/1.5mm/2.0mm( can be customized)
Standard Size : 1200*1200mm (Can be customized)
Easy to fabrication
Enviroment Friendly
DESCRIPTION:
Excellent selection of 100% virgin material
On equal conditions, the light transmittance is obvious higher than traditional matte or orange peel texture diffusion sheet,
at the same time effectively suppress the glare value.
Scientific designed structure
Anti-Glaring diffuser with Concave hexagon,cone bottom,takes on homogeneous look due to unidirectional structure;
Homogeneous glare reduction
Ther scientific designed structure, well defined lamp direction with average beam angle 85 degree,
assist to improve the light efficiency and reasonable glare suppression;
Homogeneous glare reduction in all C-levels, excellent for workstations required lighting application UGR<19, for example LED Panel light;
Material Character:
Application:
The application is different depend on the edge -lit usage or back-lit usage, for example if it's side-lit usage, there will be four layer structure, from the top to bottom will be UGR diffuser sheet, the diffuser film and LGP and reflective film, it can be illustrated that the UGR diffuser positioned in outer layer with the texture face towards the observer; The diffusion film located in the middle layer with the micro structure facing towards the LGP; the LGP be placed between the diffusion film and the reflective film, and with the dot side facing towards the diffusion film, the smooth side towards the reflective film.
If it's back-lit usage, there will be two layer, from the top to bottom will first be UGR diffuser sheet, then the normal diffuser sheet, and the structure will be the UGR diffuser positioned in outer layer with the texture face towards the observer; the diffuser sheet located in the bottom layer which more closer to the LED source.
Acrylic sheet, diffuser sheet, PMMA Acrylic sheet for lighting .
PMMA ACRYLIC HONEYCOMB SHEET
PROFESSIONAL MANUFACTURER OF ACRYLIC DIFFUSER PRISMATIC SHEET
TEXTURED ACRYLIC SHEET
DIFFUSER SHEET FOR LED LIGHTING
Professional manufacturer of optical plastic sheet J.K OPTICS
PMMA/PC PRISMATIC DIFFUSER
PROFESSIONAL MANUFACTURER OF LED DIFFUSER SHEET
DIFFUSER SHEET FOR LED LIGHTING