3"5"6"7" Universal Polished Sponge Disk

New technology universal throw disc New structure design, no matter RO same machine, DA eccentric vibration machine, this type of polishing sponge plate can be used. Polyester sponges are durable Polyester sponge plate, good ventilation performance, even elasticity;A single disc can be used to polish up to 5-10 vehicles under standard operations. Good toughness and compression resistance Good toughness and elasticity, not easy to crack, high tensile strength, rapid rebound after extrusion, no deformation and durable The new structural design holds the cutter When the cutting tool is lower than the set standard, it will naturally fall off the structure and produce the phenomenon of "slags". At this time, the next layer of structure is used to keep the cutting force of the sponge disk.

Yellow polishing sponge dish: sponge hole is thick, enhance the heat dissipation performance of throwing disc, help to improve the paint surface humidity, paint surface smooth force is strong.The condition of the paint surface: the paint surface has a thick oxide layer, and there are many particles attached to the paint surface.PPI: 40, Density: 40KG/M3, 40% down compression deformation force: 25N, tensile strength: 550N/mm2 (MPa), it is recommended to use down pressure: softness.Orange Polishing Sponge Plate: Sponge is hard and has strong comprehensive performance of leveling force and cutting force on the paint surface. Use condition of paint surface: medium oxide layer on paint surface, there are many small attachments on paint machine.PPI:50, Density: 45KG/M3, 40% down compression deformation force: 25N, tensile strength: 500N/mm2 (MPa), it is recommended to use down pressure: White polished sponge disk: moderate hardness and softness, strong ability to remove scratches.Condition of paint used: deep, medium scratches.PPI: 65, Density: 45KG/M3, 40% compression deformation force: 15N, tensile strength: 350N/mm2 (MPa), it is recommended to use downpressure: moderate, mild.Black polishing sponge tray: sponge is delicate, more conducive to the full grinding of the abrasive in the paint surface.Use of paint conditions: moderate scratches, wash lines, after grinding lines, after polishing lines.PPI: 70, Density: 30KG/M3, 40% compression deformation force: 10N, Tensile strength: 300N/mm2 (MPa), Recommending the use of downpressure: mild.softness.https://dgzhanfoam.en.alibaba.com/productlist.html.

1. The downpressure of the polishing is related to the durability of the coarse sponge plate, and has no relationship with the cutting force.2. In the process of use, when the abrasive accumulation is too much, it is necessary to clean the throwing disc in time.3. The collocation of throwing disc and the back sticky disc should pay attention to the size. It is a better collocation to throw disc one inch larger than the back sticky disc.4. The polishing disc should be cleaned in time after use. Solvent and alkaline cleaning agent should not be used when the barrel disc is clear.5. After cleaning the disc, it is best to turn it on and dry the water after air drying (do not expose to the sun).6.When not in daily use, it is necessary to put the throwing disc into a sealed storage box to avoid dust.