MHDRH 100w Usb C four ports Quick Charge Fast Usb Charger QC4.0 PD3.0 Gan Charger 100w

These two products are equipped with four 2a2c interfaces, each of which supports multiple mainstream fast charging protocols. The maximum output power of two usb-c ports and two usb-a ports are 100W and 30W respectively, and both of them support blind plug-in. In addition, they also support 65W + 30W dual port fast charging and Huawei 22.5w SCP fast charging, with strong overall performance.

It can be said that such a charger can complete all the digital devices such as mobile phones, tablets and laptops, improve the charging efficiency and greatly reduce the insertion pressure. This charger adopts PC flame retardant material white shell, surface frosting treatment, body four end arc transition, the overall design is very simple. From the front, the charger is almost square, and the body can be designed with the customer's own brand and logo. On the back, there are high pass qc3.0 and pd3.0 fast charging marks. The parameter information of the charger is marked on the side shell

The product has passed 3C certification and CE certification. The charger is equipped with a foldable national standard pin. At the same time, the double wing support design is added on the fuselage shell, which makes the use more stable. In addition, it also supports the installation of pins of other specifications. The output end is equipped with four interfaces of 2c2a and LED indicator. The interfaces are all blue rubber core, and PD and QC fast charging marks are set beside the two interfaces respectively. Support PPS, PD, QC, AFC, FCP, SCP, PE, SFCP, low voltage direct charging and other fast charging protocols, CC / CV mode, and dual port management logic. This 100W 2a2c Gan charger has a square and flat body, with foldable pins, and from the pin design point of view, it also supports the assembly of pins of other specifications, which is portable and suitable for various regions. The charger supports QC, AFC, FCP, SCP, MTK, PE + 2.0, PD and PPS fast charging protocols, and the two types of interfaces are designed to support blind plug-in, so users do not need to look for fast charging interfaces, which is convenient to use. The interface supports 100W, 65W + 30W and Huawei 22.5w fast charging, with wide support and strong practicability. The whole product is portable and easy to use. The charger has built-in PFC boost circuit. The switching power supply is composed of NXP primary controller, innoseco Gan power chip and new Jieneng MOS, with fixed voltage output; The four interfaces adopt three independent step-down outputs, and the Zhirong sw3516 is used for secondary step-down and protocol identification control output. The output power of two usb-c interfaces is controlled by a MCU to realize intelligent power distribution.

In addition, the components on the PCB board are treated with glue injection, and the front and back sides are also equipped with isolation plates and large-area brass heat sinks to enhance the internal stability and heat dissipation performance; The setting of secondary filter solid-state capacitor at the output ensures the purity of the output. The internal details of the charger are exquisite, and the overall workmanship is solid.