ASTM D3330 Test Method A 180 Degree Peel Adhesion Tester
ASTM D3330 Test Method A 180 Degree Peel Adhesion Tester.
ASTM D3330 Test Method A measures the peel adhesion of single-coated adhesive tape, when peeled at a 180 degree angle. The purpose of ASTM D3330 data results help assess the uniformity of adhesion for pressure sensitive tapes. The test materials consist of preparing several strips of tape to be tested and a hard substrate, such as a metal plate. The tape is applied to the substrate with an even pressure using a handheld roller. The tape is then pulled from the plate at a 180 degree angle at a specified rate, and peel adhesion is measured.
ASTM D3330 Test Method A 180 Degree Peel Adhesion Tester.
The peel tester follow standards Afera 5001-Self Adhesive Tapes - Measurement of Peel Adhesion from Stainless Steel or from its own Backing.
Self Adhesive Tapes - Measurement of Peel Adhesion from Stainless Steel or from its own Backing. These methods cover the measurement of the peel adhesion of pressure sensitive tapes from a test panel or its own backing at a controlled angle (either 180 or 90 degerees) and at a standard rate of peel. This machine can also do other tests.
Contact Angel Tester Water Drop Testing Machine
Rolldown Machine 4.5Ib Load For Tape Specimen
Tape Holding Power Tester Normal Type 10 Workstations
Horizontal Tension Machine 2000N For Cable Wire Film
LCD Display Tension Testing Machine 1000N With Clamps
Large Deformation Tensile Testing Equipment Extension Strength Testing
Loop Tack Testing Machine PSTC-16
Computer Controlled 90 Degree Peel Adhesion Tester
5KN Universal Testing Machine For Tension And Compression