JKBLD300 Brushless DC Motor Driver
Product Type: 300W BLDC Motor Driver
Feature summary:high torque, low noise, low vibration, over current protect, over load protection.
Place of Origin:china
Minimum order quantity:10pcs
Support Motor: Brushless dc motor less of 300w
Packing:The sample is packed in carton,the batch with plastic pallet
Delivery time:Standard product: 7-10days
Customized product: 25-30days
transaction mode:EXW, FOB, FCA, CIF, FAS, CFR, CPT, CIP, DAF, DEQ, DDU, DDP...
JKBLD300 brushless dc driver is suit the following three-phase sine wave power is 300 w brushless dc motor speed regulation, can provide an external potentiometer control, external analog voltage control, PC (such as PLC, SCM) PWM speed regulation, and other functions. At the same time the drive have large starting torque, quick start and brake, and positive &negative switching, combination of manual and automatic control.
Brand Name: Jkongmotor
Model Name: JKBLD300
Type: BLDC motor driver
Power: 300W
Environment temperature: -10℃—50℃
Input Voltage: +18—+50VDC
Output Current: 15A—35A
Suitable Motor Speed: 0-20000Rpm
Hall Sensor Voltage: 4.5V—5.5V
External Potentiometer: 10kΩ
Parameter | Min | Rated | Max | Unit |
Motor Hall Sensor Angle | 120°/240° |
| ||
DC Power Input | 18 | 48 | 50 | V |
Drive Current Output | 0 | 15 | 35 | A |
Suitable Motor Speed | 0 |
| 20000 | rpm |
Hall Sensor Voltage | 4.5 | 5 | 5.5 | V |
Hall Sensor Current |
| 20 |
| mA |
External Potentiometer |
| 10K |
| Ω |
Mark | Definition |
DC+/DC- | DC Power Input (DC24V~DC48V) |
U,V,W | Motor lead wire |
Hu,Hv,Hw | Hall sensor lead wire |
REF+ | Hall sensor power supply + |
REF- | Hall sensor power supply - |
VCC | External potentiometer power supply + |
SV | External potentiometer |
COM | Public (low level) |
F/R | Direction: High level/CW Low Level/CCW |
EN | Enable: High Level/Stop Low Level/Run |
BRK | Quick Brake: High Level/Stop Low Level/Run |
SPEED | Speed signal output |
ALARM | Alarm signal output |
Speed Adjustment Instruction: | Motor Speed Quick Response Setting: |
A. Motor speed adjusted by the internal potentiometer RV | OP/CL Connected (user setting): |
B. Motor speed adjusted by the external potentiometer | PID Closed loop-Motor quick response |
C. Motor speed adjusted by analog signal 0V~+5V input | OP/CL Disconnected (factory setting): |
D. Motor speed adjusted by analog signal 0V~+10V input | NO PID Closed loop-Motor normal response |
Pulse duty ratio 10%-90% / Speed linear modulation | Lead Wire Connection: |
| Take care of the sequence of U,V,W |
Power parameter setting:
Note: to prevent electric pilot time to super power operation and damage Motor, please according to the above numerical combined with electrical power Properly set.Great changes have taken place when the load and lead to electricity Actual operation power more than setting will go into the drive Protected mode.
1、Q: Are you factory?
A:Yes, we are factory, and we produce stepper motor/driver, Servo motor/driver, BLDC motor/driver...
2、Q: How to select models?
A:Before purchasing, please contact us to confirm model No. and specifications to avoid any misunderstanding.
3、Q: How do you ship the goods?
A: Sea and by air, also accept customer appointed.
4、Q: Can I test sample?
A: Yes, sample charged can be offered for testing.
5、Q: Can we be agent or distributor?
A: Yes, welcome and we will support you.
6、Q: Can you do OEM or ODM service?
A: Yes, we have R&D department and accept OEM and ODM service.
1.8°Nema 34 Linear Stepper Motor 86x86mm for for 3D printer CNC Engraving Milling Machine
1.8° Nema 14 Hybrid Stepper Motor 35x35mm 0.5A or 1A with 4leads
1.8° Nema 34 Hybrid Stepper Motor 86x86mm with 4leads or 6leads
1.8° Nema 16 Hybrid Stepper Motor 39x39mm with 4leads or 6leads
1.8 Degree Nema 11 Hybrid Stepper Motor 28x28mm 0.67A or 0.95A With 4leads or 6leads
0.9° 36mm 2-Phase Hybrid Round Stepper Motor 36x36mm With 4leads
1.8° Nema 24 Worm Gearbox Stepper Motor 60x60mm for CNC Milling
1.8° Nema 24 HSG Eccentric Gearbox Stepper Motor 60x60mm for CNC Milling
1.8° Nema 24 HSP Planetary Gearbox Stepper Motor 60x60mm for CNC Milling