Hardware Products Installation and Maintenance

For specific maintenance, please operate as follows:

● Rinse the impurities in the water pipe before installing it to avoid damage to the valve core, jamming, and blockage and leakage of the water nozzle (filter) and failure to operate normally.

● Install according to the installation dimension drawing to ensure that the product is installed correctly. When the size does not match, please do not install it forcibly, so as not to damage the parts of the bathroom products.

● When installing the faucet, try not to knock it against hard objects, and do not leave cement, glue and other substances on the surface, so as not to damage the gloss of the surface coating.

● When the air temperature is lower than zero, if you find that the handle feels abnormal, you must use the heat source water to scald the sanitary products until the feel is normal, otherwise it will affect the service life of the valve core.

● Because the water contains a small amount of carbolic acid, and it is easy to form scale after evaporating on the metal surface, which will corrode the surface of the faucet, which will affect the cleaning and service life of the faucet. Therefore, always use a soft cotton cloth or sponge with neutral soap to wipe the surface of the faucet (note: do not wipe with corrosive or acidic items), and then dry the surface with a soft cloth. Avoid using metal filaments or scouring pads with harder particles. In addition, don't hit hard objects to damage the surface of the faucet.

● The dripping phenomenon after the faucet is closed is caused by the presence of water in the cavity after the faucet is closed, which is a normal phenomenon. If the dripping does not stop for a long time (more than ten minutes), it is a water leak (quality problem).

● In order to ensure the normal use of the faucet, the water pressure must not be lower than 0.05Mpa (ie 0.5kgf/cm2). Too low or too high may cause the faucet to leak.