Factory direct supply Zirconia (ZRO2) bearings 6900CE deep groove ball rolling bearings custom

Ceramic bearing cleaning, removal of ceramic bearing examination, the first record of the appearance of ceramic bearing, to confirm the amount of lubricant residue, sample the lubricant used after washing ceramic bearing. Stainless steel bearings and ordinary bearings, not only the material has obvious advantages, but also in the process, precision control, than ordinary bearings to be much more stringent. In the working process of stainless steel bearings stable work, low noise, corrosion-resistant, widely used. As a detergent, the individual use of gasoline, kerosene. Unloaded ceramic bearing of the wash, coarse wash and fine wash, resolution on the container, put the metal net bottom first, so that ceramic bearings do not directly contact the container of dirt. Rough wash, if the ceramic bearing with dirty rotating, will harm the ceramic bearing surface, should be careful. In the rough wash oil, the use of a brush to remove grease, adhesion, roughly clean, into the fine wash. Fine Wash, is the ceramic bearing in the wash oil in the side of rotation, while careful washing. Stainless steel bearings and ordinary bearings, not only the material has obvious advantages, but also in the process, precision control, than ordinary bearings to be much more stringent. In the working process of stainless steel bearings stable work, low noise, corrosion-resistant, widely used. In addition, clean the oil regularly. Ceramic bearing used in special circumstances, such as acid and Alkali, high temperature and low temperature, no oil self-lubrication, no magnetic insulation of the environment. In order to make the bearing service life longer, no matter what type of bearing must be scheduled maintenance maintenance. Ceramic bearings have two types of wheels: 1. Pure ceramic bearings, its interior does not add lubricating grease, some pure ceramic bearings do not seal ring, some seal ring. Ceramic Ball Dry isostatic press do ball low-temperature pre-firing, spheronization, high-temperature sintering, grinding but recently learned to do first precision, or high-temperature hardness after firing. Even if a little dust into, will not affect its lubrication function. 2. Confused with ceramic bearings, its internal individual increase in different functions of grease (see customer needs) . After riding a certain mileage or time, it is necessary to maintenance, the bearing seal ring removed, with the corresponding cleaning products to clean up its internal dirty grease, and then re-loaded grease.