High Quality Precision Aluminum Extrusion CNC LED Light Bracket

2 years ago
227
Share
Let me elaborate the aluminum extrusion CNC light bracket how to install and its advantages as following :
(1) Profile matching: The supporting frames of various workshop worktables can be made into worktables with different functions with table plates of different materials. Mark the position of the fixing plate to be installed with a pen, then drill holes in the position where holes need to be drilled in the middle of the lamp fixing plate with an electric drill, and then fix the lamp fixing plate at the position just marked with a screwdriver and screw. Insert and install the lamps assembled with the light and lamp rack onto the fixing piece, and then let go after both sides are fixed firmly. When it is necessary to connect the two lamp racks, the power cord shall be used to connect the two lamp racks in the middle. Of course, the power cord in the middle shall also be disassembled when it is not necessary to connect. When two lamps are connected and the power supply connected to the other lamp does not need power supply, the connection port shall be covered with power supply cover to prevent leakage and electric shock. So as not to break the lamps. Connect the power supply, insert the power cord from the side of the assembled lamp, then confirm whether the power supply is connected, turn on the power supply for test, turn off the power supply after the test, and continue the following work.
If it is not directly connected by line, you can choose to use the switching power supply. After the switching power supply is connected to the power line, you can directly insert the power line from the side to connect the power supply.
The last step is to install the lampshade, directly cover the interface of the lampshade, and clamp on both sides of the lamp holder. Installing the lamp shade can make the lamp more soft and the lamp tube is not polluted by the dust, and prolong the service life of the lamp tube.
(2)Solid and beautiful: Made of conveyor belt conveyor line, used with conveyor belt, solid and beautiful, good bearing capacity, easy disassembly and easy maintenance.

Advantages of aluminum alloy bracket:
(1) Light weight: Compared with other iron supports, aluminum alloy supports are lighter because of the low density of aluminum.
(2) Resistance to natural corrosion: Anyone who studies chemistry must know that aluminum in the air can react with oxygen to form a dense alumina film, so as to protect the further reaction of aluminum.
(3) Balance voltage: In the conduction photovoltaic support system, sometimes some weak current will be generated for various reasons, while the aluminum support has good conductivity, which can well balance the current and prevent some accidents.
(4) Easy to make: Aluminum profile is very light due to its low density. It is very easy to process into the required specifications through sawing, drilling, punching, folding and other processes. Therefore, aluminum alloy support is relatively easy to manufacture, which is one of the reasons why it is widely used.
(5) Low temperature resistance: The support made of aluminum alloy is very resistant to low temperature because it contains aluminum metal, unlike some other steel supports, which are not resistant to low temperature during the addition process, resulting in less hardness.
(6) Environmentally friendly and recyclable: After the aluminum support is discarded, it will not cause any pollution and is easy to recycle.
Comments
No comments received
Suppliers
Road 5, Jihua Road, Chancheng District, Foshan City, Guangdong Province, China
Comments