Super TIG 200DI Welder
SUPER TIG 200Di Welder is triple functional machine used as DC MMA ，AC TIG, DC/
PULSE TIG Welder. All ferrous metals copper, Aluminium , titanium and stainless steel
material can be omnibearing welding in all position. The welding current is stable and stepless
adjustable. The welding seam is nice. few spatter and low noise occurs during welding.The welder
is small volume, light in weight and easy to move. It is particularly suitable for enterprise of
pressure vessel, building,shipping and petrochemical works.
Audited supplier■ Digital Control IGBT inverter DC MMA,Pules ACDC TIG
■ Lift and HF for TIG
■ Hot arc start and arc force,Anti-stick for MMA
■ 32 bits MCU inside
■ Foot pedal
■ 2T/4T function
■ Advanced square,soft square,triangular,sine four AC wave for selection.
■ MINI Stlye design
■ Quckly gas connector
■ 10Memories selection
MODEL | SUPER TIG 200Di | |
INPUT | Voltage | 1 xAC 220V~240V 50Hz |
DC MMA | No-load Voltage | 70V |
current Adjusting Range | 20~160A | |
Rated Output Current | 160A | |
Rated Duty Cycle | 35% | |
AC TIG | No-load Voltage | 70V |
Current Adjusting Range | 20~200A | |
Initial current/crater-fill current | 20-200A | |
SP % (AC balance) | 30~70 | |
AC Square Wave Frequency | 20~100Hz | |
Rated Duty Cycle | 35% | |
DC TIG | Current Adjusting Range | 5~200A |
Initial current | 5-200A | |
crater-fill current | 5-200A | |
Rated Duty Cycle | 35% | |
Standard PULSE TIG | PULSE peak Current | AC:20~200A |
BASE/PULSE peak Current | 10%~95% | |
Initial current | 5A(DC)/20A(AC)~200A | |
crater-fill current | 5A(DC)/20A(AC)~200A | |
Rated Duty Cycle | 35% | |
Pulse time on | 5%~95% | |
pulse Freq. | 0.5~250Hz@DC 0.5~250Hz@AC ADV.SQUARE 0.5~250Hz@AC SOFT.SQUARE 0.5~250Hz@AC TRIANGULAR 0.5~250Hz@AC SINE WAVE | |
Current UP/Down-slope Time | 0~10S | |
Pre gas Flow Time | 0~10s | |
Post gas Flow Time | 0~10s | |
Arc starting Mode | high frequency arc striking | |
Efficiency | ≥80% | |
Mass | 15kg | |
Protection Class of enclosure | IP21S | |
Audited supplier
