Professional stone sewage treatment system Application principle

Application principle:

1. When the H series ultrasonic environmental protection sewage treatment machine starts work, the mixture of ore dust and water falls onto the slurry tank.

2. Form a thick layer of particles under the vacuum of the processing plate.

3. The filtrate is filtered through the treatment plate to the distribution valve to reach the vacuum barrel.

4. The rotor carries the filter cake through the suction zone to the drying zone, and the filter cake is dehydrated and dried under vacuum.

5. The rotor is rotated by the main shaft to bring the dried filter cake to the discharge area, and the material is discharged under the action of the scraper device, and is directly retained to the fine sand pool or transported to the desired place by belt conveyor.

6. After the unloading, the processing board enters the backwashing area. At this time, the ultrasonic filter or the external tap water of the environmental protection sewage treatment machine is used, and the pressure is adjusted through the backwashing pipeline to enter the processing chamber through the distribution valve, and is cleaned from the inside to the outside. The micropores of the plate are treated while the residual mineral remaining on the surface of the treated plate is rinsed off.

7. On the one hand, sewage treatment avoids the huge harm to the environment caused by the direct discharge of sewage. On the other hand, the water can be recycled and reused in the factory water and domestic water after being processed and treated again. Finally, the various metal elements contained in the ore sewage are in the sewage. The separated ore solids can still be used for the production of building stone, etc., and can be sold twice, creating value for the enterprise to turn waste into treasure.