2-wheels filter cart

2-wheels filter cart.

Technical Parameters

1.Frame: Approximately 46 inches high x 14 inches wide, 1 inch tubular steel

2.Filter: 5.1 OD x~12.5" OAL

3.Pump: 2 gpm; 1HP motor/110VAC-60hz

4.There is a cleanable "Y" filter in front of the pump

5.Outlet hose, 1m long, with 3/4" MNPT end adapter

6.Inlet hose, 1m long, with 1" MNPT end adapter

7.The axle should be ¾” minimum diameter

8.Pneumatic tire

9.Prefilter

1. Main filter

11. 12um and 6um filter element

12. Filter media: hydraulic oil

13. The test port is installed behind the pump, the check valve is installed online after the filter and connected to the outlet hose, three-way valve, used for bypass

14. Switch and motor with CE/UL/CSA certification

15. Three-prong grounding plug

16. Hook for hanging pipes

17. ¾” MNPT connector

18. 1” MNPT connector

19. Visual transmitter and pressure gauge

Features

1. The oil filter cart is switched by a three-way ball valve, which has two functions of filtering and directing oil without filtering

2. The oil filter car has a visual and indicating double clogging alarm device

Instructions

1. When the T-type ball valve is switched to the position in Picture 1, the oil output by the oil pump is not filtered by the filter