Battery Adapter for DEWALT Batteries - YT-BA02

1. Input voltage: DC17-21V.

2. Output voltage: USB interface 5V, DC socket interface 12V.

3. Maximum output current: 5V is 2A, 12V is 3A.

4. Battery level display function. Plug the battery into the converter, and the battery indicator will turn on for about 5 seconds and then go out. If the indicator light keeps flashing, it prompts to charge the battery.

4-1. Three lights are on at the same time, and the battery power is greater than 80%.

4-2. The two lights are on at the same time, and the battery power is greater than 50%.

4-3. One light is on and the battery power is greater than 20%.

4-4. One flashing, battery power is less than 10%.

4-5. The three lights flash at the same time, the battery is used up, and the converter stops output.

5. Three protection features: short circuit protection, over current protection, under voltage protection

Precautions:

5-1. When the output has no output due to short circuit or over current protection, remove the converter from the battery and plug it in again to restore the output

5-2. When the converter is not in use, please remove it from the battery and place it