110V 220V 5.8GHz microwave radar sensor switch for automatic door, led light, air conditioner BS029A

3 years ago
359
Share

Product Parameters /radar sensor switch

Instruction

 * The sensor is an active motion detector

 * It emits high-frequency electron-magnetic wave(5.8GHz) and receives their echo.

 * The sensor detects the change in echo from even the slightest movement in its detection zone.

 * A microprocessor then triggers the “switch light ON” command.

 * Detection is possible through doors, panes of glass or thin walls.


Important: persons or objects moving towards the sensor are detected best!

Comments
No comments received
Suppliers
Shenzhen Rayzeek Tech. Ltd.
Audited supplier
4YRS
6F, B1 Building,Hezhou Hengfeng Industrial Town,Xixiang,Baoan,Shenzhen China 518102
Product details
Comments
Products Description
Welcome to use BS029A 5.8GHz microwave detectors 110V 220V

Product  Paramenters
The sensor is an active motion detector, it emits high-frequency electro-magnetic wave ( 5.8GHz) and receives their echo. The sensor detects the change in echo from even the slightest movement in its detection zone. A microprocessor then triggers the "switch  light ON" command. Detection is possible through doors, panes of glass or thin walls
Important: persons or objects moving towards the sensor are detected best!

Details Images  for microwave detectors
Installation Instructions microwave detectors
* The sensor is an active motion detector
* It emits high-frequency electro-magnetic wave(5.8GHz) and receives their echo.
* The sensor detects the change in echo from even the slightest movement in its detection zone.
* A microprocessor then triggers the “switch light ON” command.
* Detection is possible through doors, panes of glass or thin walls.
Important: persons or objects moving towards the sensor are detected best!
Specifications for microwave detectors
Model No.
microwave detectors BS029A
Power Sourcing
220V/AC-240V/AC 110V
Detection Range
360°
Detection Distance
1-8m (radius) adjustable
HF System
5.8GHz CW radar, ISM band
Ambient Light
2-2000LUX (Adjustable)
Time setting
8sec-12min
Transmission Power
<0.2mW
Power Consumption
0.9W
Installation sit
Indoors ,ceiling mounting
Rated Load
1200W (220-240VAC)
microwave detectors FUNCTION:
Reach setting (sensitivity)
Reach is the term used to describe the radii of the more or less circular detection zone produced on the ground after mounting the sensor light at a height of 2.5m, turn the reach control fully anticlockwise to select minimum reach (approx.1 m radii), and fully clockwise to select maximum reach (approx. 8m radii).
NOTE: the above detection distance is gained in the case of a person who is between 1.6m-1.7m tall with middle figure and moves at a speed of 1.0-1.5Sm/sec. if person's stature, figure and moving speed change, the detection distance will also change.


NOTE: after the light switches OFF, it takes approx. 1sec before it is able to start detecting movement again. The light will only switch on in response to movement once this period has elapsed.
Time setting/microwave detectors
The light can be set to stay ON for any period of time between Connect N, L with power Connect N, L'with load. approx. 8sec (turn fully anti-clockwise) and a maximum of 12min (turn fully clockwise). Any movement detected before this time
elapse will re-start the timer. It is recommended to select the shortest time for adjusting the detection zone and for performing  the walk test.
NOTE: after the light switches OFF, it takes approx. 1sec before it is able to start detecting movement again. The light will only switch on in response to movement once this period has elapsed.

Light-control setting/microwave detectors
The chosen light response threshold can be infinitely from approx. 2-20001ux. Turn it fully anti-clockwise to select dusk­ to-dawn  operation at about 2 lux. Turn it fully clockwise to select daylight operation at about 20001ux. The knob must be turned fully clockwise when adjusting the detection zone and performing the walk test in daylight.


NOTE: the high-frequency output of this sensor is <0.2mW-  that is just one 500th of the transmission power of a mobile phone or the output of a microwave oven.   /microwave doppler radar sensor