HomeSuppliersTrade Resources
HomeConsumer ElectronicsOther Consumer ElectronicsProduct

ET845 Universal gate door controller home appliance roller shutter receiver

2 years ago
234
Share

1.Can be connected to the correlation and 220v lighting device
2.Automatic door closing function
3.Super load
4.Travel memory, ensure the door switch is accurate
5.Maximum running time :4 minutes
6.motor protection to prevent motor burn out
7.The maximum delay time for the system to wait for automatic closing is 10min

Comments
No comments received
Suppliers
Shenzhen Yaoertai Technological Development CO., LTD.
Audited supplier
China3YRS
Room 601, 6th Floor, 27 Lianchuang Science And Technology Park, No. 21, Bulan Road, Nanwan Street, Longgang District, Shenzhen, Guangdong, China
Product details
Comments

Programming

Insertion of transmitters.

1. A) Set UP key on the remote control: Press the programming button (LEARN) on the control unit once, the red LED light will light up.

Press the key of the command that we want to be the UP key, the LED will blink five times indicating that the process has been performed correctly.

1. B) Set DOWN key on the remote control: Press the programming button (LEARN) on the control panel twice, the red LED light will light up. Press the key of the command that we want to be the DOWN key. The LED flashes five times indicating that the process has been performed correctly.

1. C) Set STOP key on the remote control: Press the programming button (LEARN) on the control unit three times, the red LED light will be on.

Press the key of the command that we want to be the STOP key. The LED will blink five times indicating that the process has been performed correctly.

1. D) Set LOCK / LIGHT key on the remote control: Press the programming button (LEARN) on the control panel four times, the red LED light will be on. Press the key of the command that we want to be the LOCK / LIGHT key. The LED will flash five times indicating that the process has been performed correctly.

Reset of transmitters.

1. A) Press and hold the 'LEARN' button until the red LED light turns off, then release the 'LEARN' button with this, the factory default

setting is reset (60 sec. Operating time and 30 sec).

Suppliers
Shenzhen Yaoertai Technological Development CO., LTD.
Audited supplier
China3YRS
Room 601, 6th Floor, 27 Lianchuang Science And Technology Park, No. 21, Bulan Road, Nanwan Street, Longgang District, Shenzhen, Guangdong, China
You may also like