BS031B China infrared pir motion sensor de movimiento sensor switch for Guangdong, China

With experienced, professional, and well-educated employees,Shenzhen Rayzeek Tech. Ltd. is efficient and excellent in developing products, one of which is BS031B China infrared pir motion sensor de movimiento sensor switch. It has some unique features. BS031B China infrared pir motion sensor de movimiento sensor switch are superior to other similar products in terms of appearance, performance, and operation methods, and have been unanimously recognized by customers in the market, and market feedback is good. Shenzhen Rayzeek Tech. Ltd. will keep focusing on customers' needs and keep up with the industry trends so as to develop BS031B China infrared pir motion sensor de movimiento sensor switch that better satisfy customers. Our wish is to cover a wide range of global markets and win wider recognition from customers all over the world.

Pratique et écologique : l’interrupteur intelligent !
Certaines choses ne sont pas un luxe mais un investissement intelligent, comme par exemple ce détecteur de mouvement avec capteur acoustique.
Il allume et éteint la lumière automatiquement et réduit votre facture !
Son point fort : il est ultra flexible. Vous choisissez vous-même comment il doit réagir. La lumière peut par exemple s’allumer lorsque quelqu’un entre dans la pièce ou si vous dites „allumé“ ou si vous tapez des mains.
Cet interrupteur intelligent éteint bien entendu automatiquement la lumière lorsque personne ne se trouve dans son rayon. Vous pouvez naturellement aussi éteindre ou allumer la lumière manuellement.

Product Description

Specification

* Nombreuses possibilités de réglage sous le bandeau décoratif : mode mouvements, mode acoustique, sensibilité des capteurs, retardement pour éteindre
* Capteur microphone très sensible : activation à partir de 30 et jusqu’à 90 dB (ajustable)
* Capteur PIR de longue portée : jusqu’à 12 m avec un angle de 140°
* Résistant jusqu’à 500 W, ne consomme que 0,45 W
* Profondeur de montage : 35 mm
* Dimensions d’encastrement : 48 x 51 mm
* Allumage temporisé de 5 sec. à 7 min avant extinction automatique
* Ne fonctionne pas en va-et-vient
* Non compatible avec les ampoules LED

FUNCTIONS:/light motion sensor detector occupancy sensor type with timer

* LUX adjustment: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.

* Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic.(set time).
* Time-delay adjustment: It can be set according to the consumer’s desire. The minimum time is 10 sec±3 The maximum is 8min±2min.
* Multi-working mode: You can select ON, OFF, PIR, PIR+MIC mode, if you select PIR+MIC mode, the lamp will be on automatically when you knock at the door or say “I am coming back” at night you come back home, it will make your home warmer and more romantic.
* The switch: “ON”、“OFF”、“PIR”、PIR+MIC”.

INSTALLATION:/light motion sensor detector occupancy sensor type with timer
* Shut off the power.
* Loosen the connection column on the bottom of sensor, plug the wire into connection hole, tighten the screws; unload the surface of sensor, connect the sensor into connection box.
* If you want to install it in quadrate connection box, penetrate the setscrew into installation hole, block on radiator to aim
at the installation hole on connection box, then tighten the screw; if you want to install it in circular one, you can use the same way as the quadrate, also adjust the sensor’s position, tighten the setscrew on surface, then the fixing arm will open automatically, fasten the connection box.
* Switch on the power then test it.

CONNECTION-WIRE DIAGRAM

（see the following figure）

TEST:/light motion sensor detector occupancy sensor type with timer
* Set the function switch to “ON”, set “SENS” clockwise to maximum, “MIC” to middle; “LUX”clockwise to maximum; “TIME” anti-clockwise to minimum.
* Switch on the power, the lamp should be on.
* Set the function switch to “OFF”,the lamp should be off immediately, all functions should be in “stop” state.
* Set the function switch to “PIR”,30sec later, it enters into working position. The lamp will be turned on after receiving the
inductor signal.20sec. Under no inductor signal condition, the lamp should be off within 5~10sec.

Set “LUX” anti-clockwise to minimum, after it is off when there is no inductor signal condition, the lamp should be off in the
daytime, but if you use a opaque object to cover

* False-OFF: When the lights turn OFF while the room is still occupied sensor, the lamp should be on, then off within 5~10sec.

* Set the function switch to “PIR+MIC”, LUX clockwise to maximum, then the sensor is in the PIR+MIC mode, cover the detector, if the lamp is on, under no inductor signal condition, the lamp should be off after 5~10sec, after 5sec if you clap your hands, the lamp should be on, then off after 5~10sec when no inductor signal.
Note: when testing in daylight, please turn LUX knob to (SUN) position, otherwise the sensor lamp could not work!

NOTE:/light motion sensor detector occupancy sensor type with timer
* Let electrician or experienced human install it.
* The unrest objects can’t be regarded as the installation basis-face.
* There should be no hinder or unrest objects effecting detection in front of the detection window.
* Avoid installing it near temperature alteration zones, for example, air condition, central heating etc.
* Don’t open the case for your safety if you find the hitch after installation.
* If there is any difference between instruction and products, please give priority to product, sorry not to inform you again.

SOME PROBLEM AND SOLVED WAY:/light motion sensor detector occupancy sensor type with timer
* The load don’t work:

1. Please check the power and the load.
2. If the load is good.
3. If the indicator lamp is light or not.
4. Please check if the working light corresponds to the ambient- light.

* The sensitivity is poor:

1. Please check if in front of the detection window there is hinder that effect to receive the signals.
2. Please check the ambient temperature.
3. Please check if the signal source is in the detection field.
4. Please check the installation height.
5. If the moving orientation is correct.

* The sensor can’t shut off the load automatically:

1. If there is continual sensor signal in the detection field.
2. If the time-delay be set to the longest.
3. If the power correspond to the instruction.
4. If the temperature change near the sensor. Such as air condition, central heating etc.

Packing & Delivery

infrared motion sensor

♦PACKING: Neutral packing with new carton or according to customer requirements.
♦PAYMENT: T/T,Paypal,West Union,30% deposit, 70% balance before delivery.
♦LEAD TIME: Sample in 1-5 working days and large order in 12-15 working days.
♦TRANSPORT: By DHL/UPS/FEDEX, Air cargo or Sea shipment.
♦PORT OF SHIPMENT: FuTian,Shenzhen,China.
♦MOQ: 1 piece. Providing DISCOUNT and OEM service for large order.

Company Profie

Establish in 2009 in ShenZhen, doing LED components, LED lighting, Motion Sensor Switch, OEM &ODM Product service. Nowadays BESTER is one of TOP 10 professional manufactures of LED components and Motion Sensor Switch in China.
Bester has her factory, and have necessary requirement for the production steps and test steps, we call it well regulated, So we can fast & flexible for customer requirement.

Why do we choose Bester ?
• We are the most professional Motion Sensor Manufacturer & exporter in China
• Overall, close and long-term service, No matter for sales and after-sales
• Bester spirit: Be responsible to every customer, Be responsible to ourselves

How to order ?
• Tell us the model and quality you need, Get Latest Quote
• Confirm order details, Reach Trading Intention, Order PI will be sent
• Arrange the payment, After payment, we will ship out in 2-4 business days (Sample order)

Shipment
• Air Freight (DHL ,UPS ,FEDEX,TNT etc will reach you in 4-6 days ) ; Sea shipping is acceptable .

Payment
• T/T, Paypal, Western Union

Certifications :
• CCC/CE/ROHS/SAA/ERP

MOQ :
• Order: 100 sets, sample order is available

Target Market :
• North America, European, Southeast Asia, Oceania

After-Sale Service :
• Choose cheapest safest shipping company and track the order until receipt .
• any problem pls contact us within 3 days after you get it .

Warranty :
• 2 years after shippment ,spare parts will be offered to you.

Our Advantages:

Factory proceed capability and test machine:
All of our product are produced by our private moulds, and we have lots of test machine,
with rich experience in ODM, we can do ODM service for our customers with sucessful cases

FAQ

Q1. Can I have a sample order ?
A: Yes, welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:If your order quantity <1000PCS. We have inventory, so we can deliver the goods quickly , mass production time needs 3-5 weeks for order quantity more than.

Q3. Do you have any MOQ limit for order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for sensors?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

Q6. Is it OK to print my logo on motion sensor product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products.

Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

                                                                                              Certifications