News

What is the reason of using the electrostatic precipitator abnormal sound for a long time?

What is the reason of using the electrostatic precipitator abnormal sound for a long time?1. Error in connection of power cord:If the power cord is wrong, the power needs to be turned off, then open the chassis with the tool to switch the cable. 1. The loud sound reason:A. The voltage is too high, the voltage needs to be lowered.B. When the esp has water into, we needs to blow dry the purifier water.C. Positive and negative short circuit of the collector cell electrode plate electrode plate, and it is necessary to check for sundries between the electrode plate.D. For the ground wire reasons, check and connect the ground wire. 2. Low purification rate: The interior of the esp should be cleaned in time, close the chassis after cleaning, and turn on the power supply again. 3. High ambient humidity:The working environment of the esp is muggy, coupled with the restaurant cooking is mostly to steam, fry, fry and other water steam is relatively large, the humidity of the kitchen is large, a large number of water vapor pumped into the purifier through the smoke collection hood.The collector cell inside the purifier is high voltage, if there encounter more water vapor, there may be a "snap" abnormal sound.So how do you judge the "crackling" sound caused by water vapor?Turn on the inside of the electric field and you know.In addition, if the esp is not convenient to open, you can first suspend cooking water steam is larger dishes, if there is no abnormal sound, you can judge the impact of water vapor. 4. The collector cell has the foreign bodies:If the abnormal sound is excluded as water vapor, then a large probability is that the collect cell has a foreign body or the electric plate is deformed. If there is a foreign body in the collect cell, you need to open the collect cell to check, if there is a foreign body, you need to clean up the collect cell; if the collect cell is deformed, the electric plate needs to be repaired, or replace a new collect cell. 5. The collect cell is deformed: The electric plate deformation is caused by irregular cleaning, we should pay special attention to when cleaning, do not force too hard. You need find a professional company cleaning the esp, not only can ensure that the lampblack purification equipment is clean, but also can ensure that the collect cell to maintain the original shape, it will not be deformation.

What is the reason of using the electrostatic precipitator abnormal sound for a long time?

Dongguan Ruizhaohe Environmental Protection Equipment Co., Ltd.2022-01-24 15:45:07

What is the reason of using the electrostatic precipitator abnormal sound for a long time?

What is the reason of using the electrostatic precipitator abnormal sound for a long time?1. Error in connection of power cord:If the power cord is wrong, the power needs to be turned off, then open the chassis with the tool to switch the cable. 1. The loud sound reason:A. The voltage is too high, the voltage needs to be lowered.B. When the esp has water into, we needs to blow dry the purifier water.C. Positive and negative short circuit of the collector cell electrode plate electrode plate, and it is necessary to check for sundries between the electrode plate.D. For the ground wire reasons, check and connect the ground wire. 2. Low purification rate: The interior of the esp should be cleaned in time, close the chassis after cleaning, and turn on the power supply again. 3. High ambient humidity:The working environment of the esp is muggy, coupled with the restaurant cooking is mostly to steam, fry, fry and other water steam is relatively large, the humidity of the kitchen is large, a large number of water vapor pumped into the purifier through the smoke collection hood.The collector cell inside the purifier is high voltage, if there encounter more water vapor, there may be a "snap" abnormal sound.So how do you judge the "crackling" sound caused by water vapor?Turn on the inside of the electric field and you know.In addition, if the esp is not convenient to open, you can first suspend cooking water steam is larger dishes, if there is no abnormal sound, you can judge the impact of water vapor. 4. The collector cell has the foreign bodies:If the abnormal sound is excluded as water vapor, then a large probability is that the collect cell has a foreign body or the electric plate is deformed. If there is a foreign body in the collect cell, you need to open the collect cell to check, if there is a foreign body, you need to clean up the collect cell; if the collect cell is deformed, the electric plate needs to be repaired, or replace a new collect cell. 5. The collect cell is deformed: The electric plate deformation is caused by irregular cleaning, we should pay special attention to when cleaning, do not force too hard. You need find a professional company cleaning the esp, not only can ensure that the lampblack purification equipment is clean, but also can ensure that the collect cell to maintain the original shape, it will not be deformation.

What is the reason of using the electrostatic precipitator abnormal sound for a long time?

Dongguan Ruizhaohe Environmental Protection Equipment Co., Ltd.2022-01-24 15:45:07

Ready meal auto weighing, packing and sealing

Smart Weigh Pack developed a complete auto weighing, packing and sealing machines for ready meal, which will be new revolution in fast food market. Most of real meal factories were manual weighing various kinds of sticky meat, sliced or cube vegetable and sauce/oil, then mixing together into a bag or tray for sealing. Smart weigh made all these process into complete automatically, we can pack by tray or bag as below, speed will be up to 1200-1500 trays/hourHow do we auto weigh and pack?1.Auto weighing sticky meat by screw style multihead weigher2.Auto weighing sliced/cube vegetable by special multihead weigher3.Auto filling sauce by liquid pump4.Auto sealing the premade bag or tray sealer, then laser printing or labeling5.All food contact parts on the machines can be washed down directly (IP65 Waterproof), very easy for the cleaning after daily workReference ready meal pack by tray video as below:Scope for all machines in the video as below:1.Z bucket conveyor for conveying various products onto auto weighing machine2.Screw Multihead weigher for sticky meat3.Vegetable Combination weigher for sliced/cube vegetable4.Linear weigher for rice auto weighing5.Liquid pump for sauce and oil filling6.Auto tray sealing machine for tray sealingTray sealing project reference drawing and machine picture:

Ready meal auto weighing, packing and sealing

Guangdong Smart Weigh Packaging Machinery Co., Ltd2022-01-24 15:06:34

Shipped Before The Spring Festival - Two 40ft Containers

Suzhou Pharma Machinery Co., Ltd. specializes in the production of clean room and cleaning equipment, has a good reputation in our industry. The Spring Festival, a traditional festival in China, is coming soon. Our company still delivered the goods within the specified time according to the customer's requirements even when the logistics is about to be suspended. Because we did not relax on the eve of the holiday, our customers expressed their trust in us and expressed their expectation for our next cooperation. The goods shipped this time are clean room panels and aluminum profiles. As for the clean room panels, the customer chose rock wool core handmade panels, using rock wool as the core material, which increases the fire resistance of the sandwich panels.The handmade panel is stronger than the machine-made panel, so the customer chooses the metal surface rock wool sandwich handmade panel. It has the advantages of strong thermal insulation performance, good fire resistance and high strength, and is widely used in clean room partitions and ceilings. Aluminium profiles are used for the connection of clean room panels, to cut off dust from entering the clean room wall-wall, ceiling-wall, wall-floor and other gaps. At the installation site, customers may not have enough aluminum profiles due to cutting or other problems, so we usually reserve a few aluminum profiles for customers as spares before delivery. Regarding aluminum profiles, we provide cutting services, which can be cut to the length required by the customer during installation, thus avoiding the waste caused by cutting and saving the customer's labor cost. The Chinese traditional festival Spring Festival is coming. According to the matching of the twelve earthly branches, there are 12 zodiac signs in China. In the 12 Chinese zodiac signs, each animal represents a year, including the rat, the ox, the tiger, the rabbit, the dragon, the snake, the Horse, sheep, monkey, rooster, dog, pig, 2022 is the year of the tiger. In the new year, wish everyone a prosperous year of the tiger, prosperous fortune, prosperous financial resources! See you next year!                                                                   Suzhou Pharma Machinery Co.,Ltd.2022/01/24Crystal

Shipped Before The Spring Festival - Two 40ft Containers

SUZHOU PHARMA MACHINERY CO.,LTD.2022-01-24 13:44:54

Whole water soluble potassium sulfate project successfully passed the completion acceptance

Recently, the whole water soluble potassium sulfate project of SDIC Xinjiang Luobupo Potash Co., Ltd. successfully completed the test run and the project successfully passed the completion acceptance. Meibao provided a heating system with output heat of 8 million kcal/hour and output temperature of 550℃.

Whole water soluble potassium sulfate project successfully passed the completion acceptance

Zhejiang Meibao Industrial Technology Co., Ltd2022-01-24 11:47:53

Delivery of Cuban spray tower detergent powder + liquid detergent EPC project

The Cuban spray tower detergent powder + liquid detergent EPC project, under the inspection and supervision of a third-party professional organization, began loading and shipping yesterday.

Delivery of Cuban spray tower detergent powder + liquid detergent EPC project

Zhejiang Meibao Industrial Technology Co., Ltd2022-01-24 11:41:11

Meibao won the bidding for the EPC project of wet process sodium silicate complete production line

Recently, Meibao won the bidding of "EPC project of wet process sodium silicate complete production line with annual output of 50,000 tons" and "EPC project of two sets of AOS/K12 complete drying project with annual output of 10,000 tons" of Zanyu Group.Zanyu Technology Group Co., Ltd. is a high-tech enterprise specializing in the R&D, production and sales of surfactant and oleochemicals. In Nov. 2011, it’s successfully listed in Shenzhen stock exchange center (Zanyu Technology with stock No.:002637). Annal sales quantity of surfactants and oleochemicals is more than 1,000,000 tons. The production and sales of main products have been the first in China for many years, and many products have entered the international market.

Meibao won the bidding for the EPC project of wet process sodium silicate complete production line

Zhejiang Meibao Industrial Technology Co., Ltd2022-01-24 10:58:03

The construction projects of spray tower detergent powder production line is progressing smoothly

Meibao designs and contracts the construction of overseas annual output of 200,000 tons and 80,000 tons spray tower detergent powder production line. The two parties have actively worked together to overcome the epidemic, shipping & logistics and other difficulties, actively promote project construction.

The construction projects of spray tower detergent powder production line is progressing smoothly

Zhejiang Meibao Industrial Technology Co., Ltd2022-01-24 10:53:09

Difference between Power Press and Hydraulic Press

A press machine is a tool that changes the shape of different materials by pressing the pressure. It represents a tool that is essential in the performance of manufacturing processes. These machines vary in size and the amount of force. Press machines are also used in metal extrusion and metal fabrication processes. A press machine can be classified according to:Mechanism: hydraulic, mechanical, and pneumatic.Structure: screw pressFunction: forging press, press brakes, punch press.There are many types of press machines, but the main types are power press and hydraulic press.We will highlight the main difference between hydraulic and power presses and their function and application areas. Although all the mechanism of the press machines is the same, it is important to understand the difference between hydraulic and power press.Hydraulic press:Hydraulic is a machine used by hydraulic cylinders to generate compression force. They drive the energy through the hydraulic pressure. The hydraulic press machine works over a long distance.  It works on the principle of Pascal's law, which states that when pressure is applied to a small fluid, pressure change happens to all the fluid. It is used for lifting heavyweight with the application of slight pressure.  Working principle of Hydraulic press:It works on simple principles. Hydraulic press machine consists of a piston, a cylinder, and a power unit. The hydraulic power pump moves the piston to increase the liquid pressure, and then the hydraulic cylinder moves along the axis of the piston. This mechanism generates a linear momentum force which forces ram on the work piece.The pressure generated by the hydraulic machine depends on the working pressure and cylinder diameter. The power unit\pump also plays an important role in maintaining and determining the ram.Power press:Power press is a type of press machine used to cut, punch and blend any metal material into the required shape. The energy in the power press comes from the motor of the system. It encompasses a wide range of different machine types. The power press machine transfers the rotational force into the translation force. These types of pressers are higher in speed. The correct range of the stroke is very important in the power press while manufacturing. Working principle of Power press:Power press generates its power mechanically. The main principle of the power press is that its motor drives the flywheel, and the clutch drives the gears. As the motor is the main system of the power press machine, the flywheel converts the kinetic energy to the power press machine. The bigger the mass of the flywheel, the bigger will be the level of kinetic energy.All the components of the power press are connected so that it can produce high speed and productivity. But due to this, the applications of the power press are limited.Difference between Power press and Hydraulic Press:Pressure: Hydraulic press machines have static pressure, which can be slow down while the pressure in the power press is rapid downward.Speed control: Power press machines are rigid, and these machines' speed is uncontrollable. While in a hydraulic press, their pressure is changeable.Low elongation pressure: The power press is best for small jewelry due to low elongation pressure and high efficiency.Difference in function:The difference in the function of hydraulic press and power press is:Hydraulic press machinePower press machineFunctionForgingFormingBendingPunchingCuttingPunchingFoamingDeep drawing Difference in application areas:Apart from the difference in the function of both machines, it has also the difference in its application which is given below:Power press is mostly used to form hard parts of different machinery such as electronics, furniture, transportation household appliance, and many more.The hydraulic press machine is mostly used in various industries. These are used for shoemaking, handbag, bushing part pressing, calibrating. The hydraulic press machine is also used in electric motors, automatic motors, micro-motors, air conditioning motors, and servo motors. Advantages and disadvantages of Hydraulic Press:Advantages of hydraulic press machine are as follows:Flexible in operation: Hydraulic press machine is more flexible in operation. As sliding length in this machine can be changed because its stroke length is variable. It can also control the sliding movement and position.Low maintenance cost: Hydraulic press is cheaper than power press.Maximum pressure: In a hydraulic press machine, maximum pressure can be generated, allowing more operation.Disadvantages of hydraulic press are as follows:Low hydraulic power: The production cost of hydraulic power is low, reducing the output and accuracy.Hydraulic oil leakage: The most common disadvantage of the hydraulic press machine is hydraulic oil leakage.Advantage and disadvantages of Power press:Advantages of the Power press are:Simple in operation: The components of the Power press are interrelated to each other. Due to this, the power press is simple in operation requirements, and its operating cost is also lower.High-speed machine: A power press machine is a high-speed machine with more production due to its speed.No leakage:  It does not contain hydraulic oil, so there is no leakage issue in the power press machine.Disadvantages of power press are as follows:Limitation of fixed stroke: The components of the power press are interconnected with each other, and it caused the limitation of fixed stroke. It is not perfect for those applications which require variable stroke length.High maintenance cost: The components of the power press are very expensive.Final thoughts:Hydraulic and power press machines have the same working principle but different characteristics. Both press machines have their advantages and disadvantage, and they vary in function. These press machines have a wide range of applications in industries.

Difference between Power Press and Hydraulic Press

Shanghai Yingxin World Machinery Co., Ltd.2022-01-24 10:46:29

Clean Bench Introduction

Clean bench is a kind of box-type air purification equipment that can provide local dust-free clean, aseptic working environment Class 100 local operating environment. And it can artificially control the discharge of the polluted air in the working area through a special filter channel to avoid harm to people and the environment. It can maintain the performance parameters such as wind speed, air cleanliness, noise, vibration and lighting in the working space to meet the requirements of laboratory use under working conditions, and is widely used in biological laboratories, medical and health, biopharmaceutical and other related industries. conditions, protect the health of operators, and improve product quality and yield. How clean bench worksThe working principle of the clean workbench is to inhale air through a fan, and filter it through a high-efficiency filter through a static pressure box. The filtered clean air is sent out in the state of vertical or horizontal airflow, so that the operating area can continuously reach 100-level cleanliness under the control of clean air, so as to form a sterile and high-clean working environment How to use clean bench1. Connect to 220V, 50Hz AC power supply.2. Press the relevant function keys on the operation panel as required.3. Before use, lower the bottom edge of the glass door to the bottom, turn on the UV lamp, and disinfect for more than half an hour.1) When sterilizing, people should leave the room to protect eyes and skin and avoid injury caused by accidental exposure.2) The intensity of the UV lamp should be checked regularly according to the manufacturer's specifications, and it is recommended to replace it once a quarter.4. Lift the bottom edge of the glass door to a suitable height, turn on the fan, and run for half an hour before the normal experiment operation in the cabinet; in order to ensure the safety of the operation, put the experimental supplies in the safety cabinet in advance.5. After use, lower the bottom edge of the glass door to the bottom, turn on the UV lamp, and then turn off the device after disinfection for more than half an hour. Our company has been engaged in cleaning equipment for many years. If you are interested in our clean benches, please contact us and look forward to your inquiry.                                                    Suzhou Pharma Machinery Co.,Ltd. 2022/01/23 Birkey 

Clean Bench Introduction

SUZHOU PHARMA MACHINERY CO.,LTD.2022-01-23 22:02:34

Briefly talk about the development trend of PVD vacuum coating machine

Briefly talk about the development trend of PVD vacuum coating machineThe use of PVD vacuum coating equipment can effectively improve the pollution of electroplating. Unlike chemical electroplating, which uses heavy metal solution and acid solution for coating, it adopts vacuum evaporation or sputtering coating without pollution. It is a green low-carbon , In line with the sustainable development strategy of the industry, more and more companies have eliminated the traditional chemical electroplating method and switched to vacuum electroplating, but there are still many companies who do not realize the importance of environmental protection and do not understand that green production is actually for Create a better living environment for yourself and future generations.Green environmental protection industry is an inevitable trend of development. Chemical electroplating, which causes serious pollution, will eventually withdraw from the stage of history and be replaced by PVD vacuum electroplating. At present, the vacuum coating industry mainly uses plastic parts, such as ABS plastic electroplating equipment, but there is no doubt that vacuum coating machines gradually use coating to become the mainstream.

Briefly talk about the development trend of PVD vacuum coating machine

Guangdong Zhenhua Technology Co., Ltd.2022-01-23 18:26:10

Two types of vacuum coating equipment

Two types of vacuum coating equipmentThere are many kinds of vacuum coating machines, such as evaporation coating and sputtering coating, including vacuum evaporation, magnetron sputtering, molecular beam epitaxy, sol-gel method, etc.1. For evaporative coating:Typically, heating the target material vaporizes surface components in the form of atomic clusters or ions, which are then deposited on the substrate surface to form a thin film through a film-forming process (scattering island structure-vagal structure layer growth).Thickness uniformity mainly depends on:1. Lattice matching of substrate and target2. Substrate surface temperature3. Evaporation power, rate4. Vacuum degree5. Coating time and thickness.Ingredient uniformity:The composition uniformity of the evaporative coating is not easy to guarantee. The specific adjustment factors are the same as above. However, due to the limitation in principle, the component uniformity of non-single-component evaporative coatings is poor.The uniformity of crystal orientation is as follows1. Lattice matching degree2. Substrate temperature3. Evaporation rate4. Sputtering coating can be simply understood as bombarding the target with electrons or high-energy lasers, sputtering surface components in the form of atomic clusters or ions, and then depositing them on the surface of the substrate.There are many types of sputter coatings. Generally speaking, the difference between sputter coating and evaporation coating is that the sputtering rate will be one of the main parameters.The compositional uniformity of laser sputtering PLD is easy to maintain, but the thickness uniformity at the atomic scale is relatively poor (because it is pulsed sputtering), and the control of crystal orientation (outer edge) growth is relatively general. with PLDFor example, the main influencing factors are: lattice matching degree between the target and the substrate, coating atmosphere (low pressure gas atmosphere), substrate temperature, laser power, pulse frequency, sputtering time, etc. For different sputtering materials and substratesThe parameters need to be determined experimentally, which are different. The quality of the coating equipment mainly depends on whether the temperature can be accurately controlled, whether it can ensure a good vacuum degree, and whether it can ensure a good vacuum chamber cleanliness.

Two types of vacuum coating equipment

Guangdong Zhenhua Technology Co., Ltd.2022-01-23 18:22:13

About Optical Coating Processing Technology

About Optical Coating Processing TechnologyHow are the processing characteristics of optical coatings classified? Basic optical coating processing devices include polarizing films, interference filters, reflective films, anti-reflection films, and beam splitters, etc. They have been widely used in the national economy and national defense construction, and have been paid more and more attention by scientific and technological workers. For example, the use of anti-reflection coatings can reduce the luminous flux loss of complex optical lenses by a factor of ten; the use of mirrors with high reflective coating ratios can double the output power of lasers; and the use of optical films can improve the efficiency and stability of silicon cells.The simplest optical film model is a smooth, isotropic, homogeneous dielectric film. In this way, the optical properties of optical films can be studied using the interference theory of light. When a monochromatic plane wave strikes an optical film, it is reflected and refracted multiple times on its two surfaces. The directions of the reflected and refracted light are given by the laws of reflection and refraction, and the amplitude of the reflected light is determined by the Fresnel formula.Optical coatings can be divided into reflective films, anti-reflection films/anti-reflection films, filters, polarizers/polarizing films, compensation films/retardation plates, alignment films, diffuser films/films, brightness enhancement films/prism films/light concentrators Film, shading film/black and white glue, etc. Related derivatives include optical grade protective films, window films, and the like.The characteristics of optical coating processing are: the surface is smooth, and the interface between the films is geometrically divided; the refractive index of the film can jump at the interface, but it is continuous in the film; it can be a transparent medium or an absorbing medium; it can be normal Uniform or normal unevenness. Generally, the extinction coefficient of metal is large. When a light beam hits a metal surface from air, the amplitude of the light entering the metal decreases rapidly, so that the light energy entering the metal decreases correspondingly, while the reflected light energy increases. The larger the extinction coefficient, the faster the attenuation of light amplitude, the less light energy entering the metal, and the higher the reflectivity. People always choose metals with large extinction coefficient and stable optical properties as metal film materials. The thin metal materials commonly used in the ultraviolet region are aluminum, the visible light region is commonly used aluminum and silver, and the infrared region is commonly used gold, silver and copper. In addition, chromium and platinum are often used as thin film materials for some special thin films. Aluminum, silver, copper and other materials. They are easily oxidized in air and reduce their performance, so they must be protected with a dielectric film. Commonly used protective film materials are silicon monoxide, magnesium fluoride, silicon dioxide, and aluminum oxide. We can choose according to our actual situation.

About Optical Coating Processing Technology

Guangdong Zhenhua Technology Co., Ltd.2022-01-22 16:50:33

Vacuum Optical Coating Equipment and Technology

Vacuum Optical Coating Equipment and TechnologyVacuum optical coating equipment is a new material synthesis and processing technology, and an important part of surface engineering technology. With the rapid development of the global manufacturing industry, vacuum coating technology has been widely used. From the perspective of the development of semiconductor integrated circuits, LEDs, displays, touch screens, solar photovoltaics, chemical industry, medicine and other industries, the demand for vacuum coating equipment, technologies and materials is increasing, including the manufacture of large-scale integrated circuit electric thin films; digital vertical and Transversely magnetizable data recording and storage films; optical films for the full display and application of various optical properties; photosensitive films for computer displays; conductive films and antireflection films on thin film transistors and plasma flat panel displays: glass coatings for the architectural and automotive industries and decorative film; protective film and barrier film in the field of packaging; functional film with various functional decorative effects on decorative materials; wear-resistant superhard film on the surface of tooling and mould; various functional films in nanomaterials research.Vacuum optical coating equipment and technology have broad application fields and development prospects. In the future, the optical coating equipment industry and other manufacturing industries will focus on information integration, rely on technological progress, pay more attention to the accumulation of technical capabilities, tend to service-oriented manufacturing, and provide optical coating to the world. The high-end value chain of the equipment industry and other manufacturing industries will be advanced.

Vacuum Optical Coating Equipment and Technology

Guangdong Zhenhua Technology Co., Ltd.2022-01-22 16:43:59

Introduction to Optical Coating in Vacuum Optical Coating Equipment

Introduction to Optical Coating in Vacuum Optical Coating EquipmentVacuum optical coating refers to a coating that can change the optical properties of optical components. Its purpose can be anti-reflection, anti-glare, filtering, etc., and according to different purposes, optical component manufacturers need to choose different materials for coating.With the continuous expansion of the application scope of plastic coating products in the optical field, the industry has higher and higher requirements for plastic coating products, and the method is relatively difficult. At present, the optical performance of conventional coating products of optical plastic products is low. The conventional coating process of optical plastic products needs to use an ion source for auxiliary coating. In the development of the entire coating process, such as the vacuum degree and the improper control of the coating process parameters, it is easy to cause the film layer to fall off and crack the film, and the abnormality in the coating process will lead to the whole process. Furnace scrapped.The essence of increasing the transmitted light intensity by the anti-reflection coating of the vacuum optical coating machine is that the light wave as an electromagnetic wave changes its energy distribution at the interface of different media during the propagation process due to the difference of boundary conditions. It is said that when the medium on both sides of the anti-reflection coating is different, the thickness of the film is an odd multiple of 1/4 wavelength and the refractive index of the film is n=(n1*n2)^(1/2) (the refractive index of medium 1 and 2, respectively) ), so that all incident light can pass through the medium.

Introduction to Optical Coating in Vacuum Optical Coating Equipment

Guangdong Zhenhua Technology Co., Ltd.2022-01-22 16:26:57

Two main types of vacuum coating equipment

Two main types of vacuum coating equipmentThere are many kinds of vacuum coating machine, such as evaporation coating and sputtering coating, including vacuum evaporation, magnetron sputtering, molecular beam epitaxy, sol-gel method, etc.1. For evaporative coating:Typically, heating the target causes the surface components to evaporate in the form of atomic clusters or ions, which are then deposited on the substrate surface to form a thin film through a film-forming process (scattering island structure-vagal structure layer growth).Thickness uniformity mainly depends on:1. Lattice matching of substrate and target2. Substrate surface temperature3. Evaporation power, rate4. Vacuum degree5. Coating time and thickness.Ingredient uniformity:The composition uniformity of the evaporative coating is not easy to guarantee. The specific adjustment factors are the same as above. However, due to the limitation in principle, the component uniformity of non-single-component evaporative coatings is poor.The uniformity of crystal orientation is as follows1. Lattice matching degree2. Substrate temperature3. Evaporation rate4. Sputtering coating can be simply understood as bombarding the target with electrons or high-energy lasers, sputtering surface components in the form of atomic clusters or ions, and then depositing them on the surface of the substrate.There are many types of sputter coatings. Generally speaking, the difference between sputter coating and evaporation coating is that the sputtering rate will be one of the main parameters.The compositional uniformity of laser sputtering PLD is easy to maintain, but the thickness uniformity at the atomic scale is relatively poor (because it is pulsed sputtering), and the control of crystal orientation (outer edge) growth is relatively general. with PLDFor example, the main influencing factors are: lattice matching degree between the target and the substrate, coating atmosphere (low pressure gas atmosphere), substrate temperature, laser power, pulse frequency, sputtering time, etc. For different sputtering materials and substratesThe parameters need to be determined experimentally, which are different. The quality of the coating equipment mainly depends on whether the temperature can be accurately controlled, whether it can ensure a good vacuum degree, and whether it can ensure a good vacuum chamber cleanliness.

Two main types of vacuum coating equipment

Guangdong Zhenhua Technology Co., Ltd.2022-01-21 21:07:49

Commercial Ice Cream Vending Machines

Commercial Ice cream vending machines are an excellent way to attract customers and increase sales for businesses. They can be set up in any place and set up to operate continuously throughout the day and night. You can design vending machines to sell different sizes and flavors of soft ice cream or frozen yogurt. The initial two stages of the procedure are simple. The second is the automated shut down and the third is the addition of additional material.In addition to vending machines for ice cream there are also vending machines for soft drinks as well as smoothie vending machines. These are great for businesses looking to offer healthy, tasty snacks to their customers. They can also be purchased in large quantities and are convenient. They are a great investment in a business. They are less expensive and simple to install. They take up a small space.There are numerous advantages to commercial ice cream vending machines. They are simple to set up and maintain and can be a cost-effective way to enter the food industry. There are many options available, including sticks or bagged ice cream. You can choose the one that best meets your requirements, based upon the requirements you have. Coin-operated machines are also available. After you have selected the machine, you are able to begin to market your new business.Commercial ice cream vending machines offer many advantages. They can attract customers by offering a variety of ice creams. Ice cream machines that are bagged are perfect for high-visibility locations. Bagged ice creams, shaved and frozen treats are a good choice for businesses because of their low cost and high visibility. This is a great method local businesses can introduce the new product.The POS system can be an effective instrument for commercial ice cream machines. It can help detect failures and send a diagnostic message to the factory monitoring center or to the owner’s cell phone. The system can also allow you to monitor the liquid level in the hoppers and track sales in real-time. If the machine is empty You can send an email to the owner.The POS system can monitor the health of your ice-cream machine and notify you with an alert message when it stops working. The POS system also lets you check the level of liquid in the hoppers so that they stay full. The machine can be monitored to ensure it is working properly. A POS system is also capable of detecting any issues in real-time. It can also send an email to the owner’s mobile phone. It can also send a message to the owner’s cell phone and alert them that Sand is low.The POS system lets you check the health of your icecream machine. It also allows you to receive alarms if the machine goes down and be alerted via an alarm message. The POS system can be used for commercial uses and is reliable. It can also be connected to an industrial monitoring center. It can also send a text message to the owner’s mobile when the vending machine is connected to an POS system. It can also send an alert message to the owner to add materials and increase sales.

Commercial Ice Cream Vending Machines

Hommy Enterprise (Xinhui) Co., LTD.2022-01-21 20:44:47

More